User Manual Part 1

26
Screens & Tabs: Features & Functions
Note about Odometer readings: The RoadLog EOBR is typically calibrated
to observe the odometer reading from the engine’s computer. The engine
computer’s odometer reading can vary significantly from the odometer reading
displayed on the dashboard. These conflicting odometer readings both come
from different message sources within the vehicle. Therefore, odometer
readings from this device may not match the odometer reading displayed on
the dashboard.
State: The state traveled during the segment (the State can be edited by
clicking in the cell and choosing another state from the drop-down menu).
Location: The nearest populated area to the area traveled during the segment.
Distance to nearest populated location: Distance to the nearest populated
area as recorded by the US census.
Bearing Data: Your current location relative to the closest most populated
place – for example, “7 miles West of Allentown, PA.”
Description: Remarks recorded by the Driver regarding changes of duty status.
Additional Events Grid data
Clicking on some of the other cells in a segment row in the events
grid opens an additional grid view showing additional details for the
segment including:
Events
Date/Time: Exact recording time for an Event.
Odometer: ECM Odometer reading at the time of the event (may not match the
instrument cluster odometer).
Event Code: Predefined codes for diagnostic events recorded by the RoadLog
EOBR, including FMCSA type events and events related specifically to the
RoadLog EOBR.
FMSCA Diagnostic Code: FMCSA codes for events that are detected and
recorded in order to maintain compliance with US HOS regulation.
Abbreviation: FMCSA abbreviations for events that are detected and recorded
in order to maintain compliance with US HOS regulation. Examples include
“ENG_ON” (Engine On) and “BATLOW” (Battery Low).
Short Description: Predefined descriptions for predefined events. An example
would be “Successful Driver log in using Driver Key.”
Description: A longer text version of the activity described in the “Short
Description.”