User Manual Part 5

106

Performing a Roadside Inspection

Retrieving, Printing and Transferring

HOS logs

To perform an inspection of the HOS Logs from the

Roadside Inspection screen, tap HOS Logs. RoadLog

displays the HOS Logs Roadside Inspection screen.

Using the radio buttons, select the name of the Driver that

you’ll perform a roadside inspection for.

Tap USB Transfer to transfer the HOS Log file to a USB

flash drive.

RoadLog displays the Insert USB Flash Drive screen.

Insert a USB flash drive into the USB port to perform the

RODS data transfer. After the transfer is complete, RoadLog

displays the Data Download Completed screen.

Note: To enable data transfer, the USB must be

formatted in the FAT32 file system.

Tap OK, and remove the USB key from the slot.

Note: The file that is transferred in the Roadside

Inspection is the RODS data (Record Of Duty Status)

text data file. No other data is transferred.

To print the chosen Driver’s daily Log from the HOS Logs

Roadside Inspection screen, Tap Print. RoadLog prints the

logs for the last 7 or 8 days (based on the Driver’s schedule),

while displaying the Printing in Progress screen.

Roadside Inspection

Insert USB Flash Drive

HOS Logs Roadside Inspection

HOS Logs Roadside Inspection Printing in progress