User Manual Part 6

120
Diagnostic Warning Screens
Screen Meaning Action required
The inserted USB device is not
recognized by RoadLog.
Remove the USB device and
insert a valid RoadLog USB
Driver or Fleet Key.
The entered Driver Identification
is not found in RoadLog
memory.
You are not able to log in to this
RoadLog.
Acknowledge the message and
log in with valid Driver ID.
Driver IDs are established in the
Fleet Software.
During system startup, RoadLog
detects that the current vehicle
position is not the same position
recorded when the device was
switched off.
Acknowledge the message. A
record of the location conflict is
stored in the RoadLog data.