User Manual for TOKEN/TOKEN PLUS Fob Document : SVI-KA4FGE09 Model : Project Code : Version: 1.0 Date: Sep. 20. '19 Engineering change order-No.: Design Freeze No.: 9 Number of pages: Filename: Identification No.
Contents list 1. 1.1 1.2 1.2.1 1.2.2 1.2.3 1.3 1.4 1.5 1.6 2 3 Page System configulation Scope of SMART KEY SYSTEM Short description of the SYSTEM General Definition of SMART KEY Wireless Communication Concept Description System Overview / Block Diagram Smart Key Fob button operation Battery Change Method Label Information FCC/IC Compliance Statement SAR Evaluation Statement Editor : KS.Kim Version: 1.0 3 3 3 3 3 3 4 5 6 7 8 9 Document name Project code ECO / DF No. File: Sep. 20.
1. System configulation 1.1 Scope of SMART KEY SYSTEM The System offers the following features: passive access for two doors, driver side and passenger side as well as trunk/tailgate passive start after interior detection of the SMART KEY FOB (without interior trunk and hat shelf detection) LF-RF communication passive access trunk/tailgate via the trunk lid switch at the trunk max.
Technical aspects of 125 kHz – magnetic field: virtually no reflections, cubical decrease of field strength allows good range control, released frequency band (ISM), high penetration, low quiescent current demand due to 125 kHz input stage (SMART KEY FOB), less sensitive for detuning compared to higher frequency. For the down-link from the SMART KEY FOB to the vehicle, the standard radio frequency (RF) is used (similar to the classic remote control functions) with FSK modulation. 1.
1.4 Smart Key Fob button operation Lock Remote Start Automatic move (forward) Unlock Automatic move (backward) HOLD(Trunk) Door open/close (Driver’s side) Panic Door open/close (Passenge’s side) You can lock, unlock, open trunk and so on your vehicle with this remote transmitter. Lock - When you push this button, all the doors will be locked. You can not lock any of the doors with this remote transmitter if any door is open or the key is in the fob holder.
1.5 Battery Change Method At the bottom of the EUT, you can use the key to open the product and change the battery. Twist the metal key or Flat-tip screwdriver Editor : KS.Kim Version: 1.0 Document name Project code ECO / DF No. File: Sep. 20. 2019 Identification No. : Document No.
1.6 Label Information SVI-KA4FGE09 FCC ID: SY5KA4FGE09 IC: 8325A-KA4FGE09 Made in Korea Editor : KS.Kim Version: 1.0 Document name Project code ECO / DF No. File: Sep. 20. 2019 Identification No. : Document No.
2 FCC/IC Compliance Statement FCC Compliance Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interferencethat may cause undesired operation. Do Not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
3 SAR Evaluation Statement This equipment complies with RSS 102 SAR evaluation limits. This equipment is used within 5mm of your body. The output power of this equipment is 1.60mW, which is lower than 54.04mW. Therefore, this equipment is excluded from SAR testing. Déclaration d'évaluation SAR: Cet équipement est conforme aux limites d'évaluation RSS 102 de RSS. Cet équipement est utilisé à moins de 5 mm de votre corps.
