Continental Automotive France SAS Interior Division- Body & Security Functional Description User Manual of the Continental Radio Frequency Transmitter (Key Fob) Model: IK4CH-01 and IK4PL-01 (433.92 MHz) IK3CH-01 (315 MHz) -1- Apr.
Continental Automotive France SAS Interior Division- Body & Security Functional description of the IK4CH-01, IK4PL-01, IK3CH-01 key 1 General Product Information This document gives an overview of the different device operation modes and the RF transmissions performance of the key model IK4CH-01, IK4PL-01, IK3CH-01. In this document the device is referenced as "key", even if the mechanical backup key might be separated from it. 1.1 Trade mark Continental 1.2 Brand Continental -2- Apr.
Continental Automotive France SAS Interior Division- Body & Security 4 Button functions The validation of the accurate frequency deviation and the measurement of the transmission function of the key are implemented based on RF test software. The graphic below shows the functionality of the buttons. First Button press Second Button press Third Button press CW Flow CW Fup Continuous RF data frame Button Lock -6- Fourth Button press Fifth button press CW Fup Stop RF emission Apr.
Continental Automotive France SAS Interior Division- Body & Security 5 Key fobs Variants Product reference Product variant Drawing IK4PL-01 A2C398083 marking : 04 Lock/Unlock/Light/Trunk 433.92 MHz EdG 433.92MHz IK4CH-01 A2C398080 marking : 02 Lock/Unlock/Light/Trunk 433.92 MHz HdG 433.92MHz -7- Apr.
Continental Automotive France SAS Interior Division- Body & Security IK3CH-01 A2C398081 marking : 01 Lock/Unlock/Light/Trunk 315 MHz HdG 315MHz IK4CH-01 A2C398084 marking : 06 Lock/Unlock/RES/Trunk 433.92 MHz HdG 433.92MHz RES -8- Apr.
Continental Automotive France SAS Interior Division- Body & Security IK4PL-01 A2C398086 marking : 08 Lock/Unlock/RES/Trunk 433.92 MHz EdG 433.92MHz RES -9- Apr.
FCC statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
