The "MOB STG" Program A300 4.4 The “EDITOR” Functions 44.1 Jump lo Address You can enter a memory address in hexadecimal format. This address will then be represented by the editor as the start address. This function can also be triggered directly In the editor with the “Tab” key. 4.4.2 Display The flowing settings are available in this menu = Switch the editor between 32-byte representation (Le.
The “MOB STG" Program RO3.00 Forgot the password? i a password is forgotten, there Is no way to obtain & again. The only solution is lo remove the main battery and the button cell farm the PRION for a few minuses. After the batteries have been re-installed and the device has been turned on, the STG assumes its status on delivery (Le, the osc Is “1237. Password Changing the password (0 agi The write-access function to the MDS and the “flexibility” function can no longer be executed.
The "MOB ETC” Program FA3.00 456 MOB E Setup » Koy AR You san switch between the "MOB key” and the “B transport key for Mi data memory.” The MOB key is always standard. The "B” selling permits the MI FARE MDS to be processed in ils status trey, (The B key must be in is original state.) » Mode: Only for MOB-E SIM (of. chapter 8.8): Switches the SIM from cyclic mode to continuous mode, Command processing is much faster in continuous mode, 4.6 The Functions 4.6.
The "PANHANDLER" Program FR o3.60 Note Remember halt the chandelier is only available for the MOB | 5.2. The File handler Commands Shortest! | File handier Command STG Command Description Fitzgerald File from Hor E12, or [READ Read a file from the MDE Tag Enter Trondheim Fie from |S of Fa2 = ead a fie from the FAM of STG RAM the hand-held terminal Fluorite File to tag.
The “FILE HANDLER" Program £03.00 103.00 The * HL HANDLE Program 5.3. View of the Editor and Directory The highlander's monitor screen display is either “Directory View” or "Editor ~ View.” You oan use the menu "Editor Display Editor” and “Displeasure Dirac troy” menu fo switch between the two displays. 53.1 The Dora Editor of the File handler The design of the data editor of the file handler is similar to the standard STG program. See chaplet 4.3. Name of tha fle in the Dior.
The “PANHANDLER Program H03.00 54 The File Functions “The file menu primarily contains three functions which can be called. » Read file « Write file + Fed and display directory Tess functions can be executed on both the MDS and the internal memory of the hand-held terminal. Tag gto BTG Bat frp Tag Rail Dir from STIR sa 5.4.1 Head File from MDS (Read File from Tag) Adler this function has been called, a menu appears in which you can select a file with the cursor keys.
EHANDLES® Program Rosewood 5.4.4 Write File to §TG RAM When a file is saved, the file name indicated in the editor Is lase indicated as ihe default name. You can still change the file name before saving the file. The file name may contain up to 8 characters. When the file is saved, the file extension HEX is automatically added to the file name. 5.4.
A300 555 MDS Status (Tag Status) This command shows the status of the MDS in several consecutive screens, MOS type (Tag type) This value is identical 10 the sp son of the MDS type with the Format command an a SOMATIC, Grass MDS size (Tug whole size) Th a of the MDS which was set with the Format command is indicated.
The FILE HANDLER” Program A 03.00 RO3.06 The "FILE HANDLER Program 5.63 Change File Size (File Size) The editor shows the current size of a file in the second line. This length can be modified with the “File Size” command. When the file I made longer, an appropriate number of zeros {00 Hex) is appended to the end of the file. The editor shows the appended portion with inverted digits, 56.4 Delete Display (Clear Display) This function clears the memory of the editor display.
The "FILE HANDLER” Program 103.00 57.2 Password for File handler (Password for FH) The chandelier password protects the STG data on the MDS from being manipulated by unauthorized parties. The passwords for the “Fie handier” and “MOB STG" programs are identical. See chaplet 4.5.2 for a description of now io handle the password. 5.7.3 . Communication in principle, communication of the fiendish is always set to “read head.” However, the merchandiser can be changed to *ASM on RS 282" as an option.