SIEMENS Table of Contents General 1 Commissioning the STG 2 mo By — STG Hand-Held Terminal The “MOB STG Program 4 User's Guide Program Expands Functions a Technical Data 9 Appendix A Published in March 2000
Safety Guidelines | 103.00 Table of Comments This manual contains notices which you should absents to ensure your own parson safety, as well ag to protect the product and connected equipment. These : entices are highlighted in the manual by ® warning triangle and are marked as, : folios according fo the level of danger: : Table of Contents Note “ 1. General. draws your attention 10 particularly important information on the product, .
Table of Contents. R03.00 or 4.8.8 454 4.5.5 4.5.6 4.8 4.8.1 46.2 463 The “FILE HANDLER” Program . &1 Antenna Address Setup MOB | Setup MOB E Setup The "7" Functions Language | About Version General Information on the Panhandler The File handler Commands Views of the Editor and Directory . The Data Editor of the File handler | View of the Clerestory Lo. The File Functions Road Fife from MDS (Read File from To © Read File from STG RAM. write Fife to MDS (Write File to Tag) write Filo to STG RAM .
STG Hand-He Nina} 7418 Ro3.00 General 1 General The STG (service and test device) Is a powerful addition to the MOB E, MOB F or MOB | identification systems. {tis a mobile hand-held terminal based on the PRION Work about ™ and is designed for applications in the areas of logistics. distribution and service. In addition, it is an indispensable aid when commissioning and testing. 1.1 Application Areas The MOB hand-held terminal can be used with MOB £. MOB And MOB £.
General 08.00 Additional functions with the MOB | file handier « Formal the MDS = Create files on the MDS = Write files to the MDS = Read files from the MDS = Read and display the directory = Delete files from the MDS The read screwed o the PRION basic device. The head is capped with a serial TTL interface for communication with the basic device, The read head is powered by the basic device.
Commissioning the TG 103.00 2.2 Assembly Perform the following steps In the order shown below. » Install bunion cell. Button cell is located in a recess in the packaging of the PRION Work about insert batteries. The battery catch must point 10 the left, insert the flash program memory with the STG application in the upper slot (A). « Install read head, and screw down, assembly is complete 2.
Using the STG £03.00 3 Using the STG 31 Keyboard The keyboard of the PRION is divided into 8 pairs. = 11 control keys directly below the display « Numerical key block with 18 keys » ASS keyboard (30 keys) including shift key Contrast, display illumination; offline. and cursor Keys ve. Green LED. Goes on whom battery is being charged. Numeric input block with Enter key ASS keyboard plus shift and special function keys (Carl, ¥ ) 3.
Using the STG 703.00 34.3 Charging Function The battery charging procedure is started as soon 2s the hand-half terminal is placed in the wall or vehicle holder. Charging is activated and indicated with a green LED. See chapter 3.
The “MOB STG" Program R03.00 {Tammany Chartreuse | Description Language NN Sel menu language About. B Manufacturer's data ? Adrian N Version of operating system an STG . application 1 These keys are only available on a hand-held terminal with a numeric keyboard. 4.1 = Data Editor The MDS data can be edited in hexadecimal or ASS. This can be stein the EDITORIALIZE menu, The editor always shows the total size of an MDS memory. Use the cursor fun: fins to access the individual addresses.
The “MOB STG” Program 703.00 4.2 MDS Functions The MDS functions handle communicant son with the MDS, The MOS function is not interrupted if you brolly move the MDS out of the read field. The MDS function is te: anted if MDS processing does not take place for more than 30 seconds. See chapter 4.4. After a command is started, a window with a bar appears on the display. This bar shows how much of the command fiats already been processed. 4.2.
The “MOB STG” Program R 03.00 4.2.5 Reading the ID Number Only MOB £. MOB F: The function reads and indicates the serial number of the MDS, The 1D number is set at the factory and cannot be changed. The "Tagline’ is displayed in hexadecimal format by the editor in the second line. The Tagline is automatically read with the "MDS phosphodiesterase” functions 4.2.6 .