2.4GHz Cordless Telephone with type II Caller ID GH4100 OWNER’S MANUAL Toll-Free Help Line 1-800-366-0937 http://www.swbfreedomphone.com Prepare By: Dreamis So P.
PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BEFORE USE. Congratulations! You have purchased a 2.4GHz Digital Cordless Telephone with type II Call Waiting Caller ID that has been manufactured to the highest standards of SOUTHWESTERN BELL FREEDOM PHONE Retail Sales. BEFORE INSTALLING AND OPERATING THIS TELEPHONE, IT IS VERY IMPORTANT THAT YOU READ THIS OWNER'S MANUAL. Prepare By: Dreamis So P.
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
Handset Battery Caution CAUTION: To Reduce the Risk of Fire or Injury to Persons, read and follow these instructions. 1. Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Metal- hydride rechargeable battery supply, AAL 9V 700mAH. 2. Use only the following type and size battery in the base unit: 9V (1604) Alkaline Battery. 3. Do not dispose of the battery (ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS................................................. 3 Handset Battery Pack .................................................................................................. 4 Handset Battery Caution ........................................................................................ 5 Handset Diagram ....................................................................................................... 8 Base Diagram .................................................
Service ..............................................................................Error! Bookmark not defined. Limited Warranty........................................................Error! Bookmark not defined. Prepare By: Dreamis So P.
Handset Diagram HANDSET CONTROLS: The diagram below shows the controls of the GH4100 handset. ANTENNA IN USE LED EARPIECE LCD DISPLAY PROG/FLASH TALK MEMORY BUTTON FORMAT/MUTE EXIT KEYPAD INTERCOM/PAGE BUTTON SPEAKERPHONE CONFERENCE/DELETE REDIAL BUTTON Prepare By: Dreamis So P.
Handset Diagram VOLUME/SCROLL UP/DOWN BATTERY DOOR Prepare By: Dreamis So P.
Handset Diagram HANDSET JACK Prepare By: Dreamis So P.
Base Diagram BASE CONTROLS: This diagram shows the controls of the GH4100 Base. PAGE BUTTON CHARGE/IN USE LED Prepare By: Dreamis So P.
Traits of Cordless Telephones A. Cordless telephone offer convenience and mobility during telephone conversations. The use of cordless phone is dependent upon the availability of DC power. Any disruption of electrical power at your location will prevent the placing or receiving of telephone calls. It is recommend that a cordless telephone should not be installed as the only phone at your location. B. The usable range of the cordless handset away from the base is dependent upon many factors.
Installation Box Contents Before installing your phone, check the shipping carton to be sure you have the following: l l l l Base Unit Short and Long Telephone Line Cord Remote Access Card Handset with Rechargeable Battery l l l l Quick Installation Guide DC Adaptor with Cord Owner’s Manual Belt Clip Notes: a. Keep the shipping carton and packaging, in case you need to transport your phone. b. If there is visible damage, do not use this equipment.
INCLUDED), INSTALLED 3-1/4” VERTICALLY APART IN THE WALL. LEAVE 3/16” OF EACH SCREQ EXPOSED FOR MOUNTING THE UNIT. A. Connect the desk/wall bracket to the bottom of the base in the wall mount position. You can remove the bracket from the base by pushing on the tab of the bracket. B. Place one end of the short telephone line cord into the modular jack marked TEL.LINE located at the back of the base. C.
7. Charge 16 hours before first use. Note : To maximize your battery’s life, we recommend that you periodically fully drain the battery and then recharge it. To do this, unplug your phone line cord from your wall phone jack. Press the “TALK” button and allow the handset to remain on for full charge for 16 hours. Caller ID Setup To set Language 1. After installing the FULLY CHARGED handset battery, the handset display will light and will show “Handset 1”. 2. Press the “PROG/FLASH” to enter the program menu.
2. Press “ ” button 3 times to select the ringer melodies item. R I N G E R M E L O D Y V I P R I N G E R 3. Press the “PROG/FLASH” again to enter the ringer melodies setting item. 4. You can choose to the ringer melodies (1-13) by pressing “ ” , “ ” or numeric keypad to input (01-13) digit to choose the desired ringer melodies. R I N G E R M E L O D Y 5. Press “PROG/FLASH” to confirm the ringer melodies and exit to the program menu. To set VIP Ringer 1. Press the “PROG/FLASH” to enter the program menu. 2.
To set Auto Talk ON/OFF 1. Press the “PROG/FLASH” to enter the program menu. 2. Press “ ” button 6 times to select the AUTO TALK item. A U T O T A L K T O N E / P U L S E 3. Press the “PROG/FLASH” again to enter the auto talk setting item. 4. You can choose the ON/OFF by pressing “ ”, “ ” to choose the auto talk enable/disable option you desire. O N O F F 5. Press “PROG/FLASH” to confirm the setting and exit to the program menu. To set Tone/Pulse 1. Press the “PROG/FLASH” to enter the program menu. 2.
Telephone Operation Making a Call 1. Make sure the base antenna is fully upright. 2. Lift the handset and press the “TALK” or “SPEAKERPHONE” button to be connected to the telephone line. SPEAKERPHONE TALK 3. After hearing a dial tone, dial the desired number. 4. If you misdial, simply press the “TALK” button if earpiece used, wait for a couple of seconds, and press the “TALK” button again for a new dial tone OR press “SPEAKERPHONE” button if speakerphone used, wait for a couple of seconds.
Ring on Intercom During intercom mode, if there comes an incoming call, caller ID will display on the screen. The intercom mode will be ended automatically, user press TALK button can answer the call. Quick Transfer Call to other Handset 1. During a call, user can press the INT key followed by destination handset number (1 - 4). 2. Press TALK key to end and the call is quickly transferred to the destination handset. It starts ringing. 3.
MEM 2. Press the “ ” , “ ” or two digits to select the memory location where the telephone number is to be stored. You can choose from MEM 01-50. Mem # 0 5 0 S E L E C T L O C A T I O N 3. Press “MEM” to confirm the location 4. Edit the name (Up to 15 characters) by using the telephone keypad buttons (0-9) Mem # 0 3 5. 6. 7. 8. E N T E R N A M E Press “MEM” to confirm the name Enter the telephone number you wish to store using the handset keypad.
show “MEM# --“ with “--“ representing the memory location that is currently displayed. 2. Press the “ ” , “ ” or two digits to select the memory location where the telephone number is to be redialed. You can choose from 01-50 3. Press the “TALK” button. The number will scroll across the screen from left to right as it is dialed. WHEN THE TALK BUTTON IS ON: 1. Press the “MEM” button on the handset. 2. Press the desired memory location (01 through 50). 3.
Speakerphone You can use your cordless telephone with handsfree feature. You can just press the “SPEAKERPHONE” button for listen the conversation by the handset speakerphone instead of earpiece. SPEAKERPHONE The LCD display will show as follow during speakerphone on: H A N D F R E E T A L K 0 0 : 0 5 V O L 2 In Hand free mode, user should press speakerphone button for disconnect the line. OR User allows pressing the TALK button for changing to earpiece.
Low Battery Warning l When the handset battery voltage level is low, the handset LCD Display shows “Battery Low” as follow B l A T T E R Y L O W Return the handset on the base cradle or charge cradle for charging. Caller ID Operation Receiving a Call 1. After first ring, the caller ’s name and telephone number will display on the handset and base display screens. The Caller ID information (of up to 40 callers) will be stored in the handset display in the order received.
Caller ID Redial The GH4100 allows you to redial a phone number in the caller ID memory. 1. When the displays show the handset number/handset name, press the “ ” , ” ” side key to select the Caller ID record that you want to dial. Note: - You can review and redial up to 40 Caller ID calls from the handset. 2. Press the “TALK” button on the handset. The number will scroll across the screen from left to right as it is dialed.
Belt Clip You can hang the handset on your belt or pocket using the belt clip. Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. Please contact and purchase a compatible headset option from dealer. When an optional headset is connected to the handset, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset.
Connection to party lines is subject to state tariffs. This equipment is hearing aid compatible. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e.., RJ11C) in the packaging with each piece of approved terminal equipment. Warning: Cha nges or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Additional Information A. Connecting this telephone to a coin operated telephone or party line is prohibited by law. B. If it is determined that your telephone is malfunctioning, the FCC requires that it be disconnected from the modular outlet until the problem has been corrected. For immediate answers to all your questions regarding the operation of your Southwestern Bell Freedom Phone , call the Customer Hotline, toll- free at (800)366-0937.
Questions? STOP...DON'T TAKE ME BACK TO THE STORE. LOOK...FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER. LISTEN...AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call the SOUTHWESTERN BELL FREEDOM PHONE HELP LINE AT: 1-800-366-0937 http://www.swbfreedomphone.
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE-YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER.
STOP – DON’T TAKE ME BACK TO STORE. LOOK – FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER. LISTEN – AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call: Southwestern Bell Freedom Phone Retails Sales Help Line at 1-800-366-0937 Monday – Friday 8:30a.m. - 9:00p.m.EST Saturday 8:30a.m. – 12:30p.m. EST http://www.swbfreedomphone.com SOUTHWESTERN BELL FREEDOM PHONE 7475N. GLEN HARBOR BLVD.
