CONTENTS IMPORTANT SAFETY INSTRUCTIONS... SAFETY INSTRUCTIONS FOR BATTERIES... 4 NAME OF CONTROLS AND 5 FCC WANTS YOU TO KNOW ...OCR rn 8 INTRODUCTION FEATURES 8 BOX CONTENTS .10 PREPARATION 10 OPERATING INSTRUCTIONS INSTALLATION oor 11 HANDSET BATTERY CHARGING CALLER ID SETUP... TELEPHONE OPERATION...
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
AME OF CONTROLS AND INDICATION Handset Controls, Indicators [Receiver Volume Switch To adjust the receiver volume fo Caller 1D A Buttons emery stroll bunions Talk Button Used to make or 10 hang ub calls Keypad Number buttons Redial Button Redials the last number of ads a pause LCD Display Indicator Caller ID Call Button Used to dial the displayed umber New Call Indicator Erases to indicate there are calls hat have riot been reviewed Erase Button Used for erasing Caller (© antsier Flash Burton Microphone Use
Base Unit Controls and Indicators DC In Telephone Line Tone / Pulse concert the AG adapter cord here | connect the telephone fine sets the unit to pulse or lone card here aiding else [Antenna Page button used to locate the handset in Use LED Lights when the handset is in Talk mae. Fishes when an in corning call is received, Charge LED Lights when the handset is on the cardie and the Battery is being charge. [Ringer On/Off Switch FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCG rules.
INTRODUCTION ABOUT THE MG4000 The MG4000 is a 800 MHz Cordless Phone with Caller identifier. it is designed and engineered to exacting standards for reliability, long ie, and outstanding performance. FEATURES + Caller 1D {84 call data memory locations) with call waiting + 40 Channels (auto or manual selection} » LCD on the handset with three-language selection + Direct dialing from caller list » Extended battery fife + Digital security coding The MG4000 features include AutoTalk™ and AutoStandby™.
INSTALLATION 1. Plug the AC adapter cord into the SV DC input jack on the Base unit. 2. Plug one end of the telephone cord into the TEL LINE jack on the Base uni, 3. Plug the other end of the telephone cord into the telephone wall jack. 4, Plug the AC adapter into a standard 120 AC wall outlet. NOTE: Use only with the AC adapter supplied with MG4000.
{CALLER ID-SETUP To Set Language . After the Handset battery is fully charged, the LGD display will show "SET LANGUAGE". EET HAMBURGER 2. Press the REVIEW “4” or “P" button to select ENGLISH, FRENCH or SPANISH. 3. Press the E key to confirm the displayed language. The unit will beep once and will begin fo set area code ENGLISH To Set Area Code 1. Press “A” or "B” button io select the correct first digit of your local area code. Press the E kay to move to the next digit.
TELEPHONE OPERATION (CONT.) Receiver Volume Control Your MGA000 allows you to adjust the handset volume to a more comfortable listening level. Slide the RECEIVER VOLUME CONTROL on the side of the handset to NORM, MID or HIGH. a Making a Call | gE 1. Lift the handset and press the TALK button to be connected to the phone line. The TALK button will light continuously. The IN USE LED on the base will light. 2. After hearing a dial tone, dial the desired number. 3.
CALLER ID OPERATION Receiving a Call After the first ring, the caller's name and telephone number will be displayed on the LCD. The LED in the Handset will flash until you review ALL your new calls. The Caller 1D information callers) will be stored in the order received. If the received call information is the same as any of the new calls, the unit will display the "RPT" icon to indicate a repeat call, if the unit receives more than 84 calls, the oldest Caller ID information will be erased.
CALLER ID OPERATION (CONT) Caller ID Erase To Erase a Single Call 1. Press the “4” or "B7 bunion to review the Caller ID records you received. 2. Press “E” button to erase the call displayed; the display will show “ERASE 7" on the bottom line. 3. Press “E” button again; the Caller ID wilt be erased and the display will show the next message. NOTE: If the current message displayed is the last message, then the display will show Ye END 7 To Erase All Calls 1.
TROUBLESHOOTING (CONT) Problem Suggestion Caller’s voice is too low. Switch the Receiver Volume Control on the handset to higher level. Conversation is interrupted frequently. or Static noise is present during conversation. Move closer to the base. Press the CHANNEL button to switch to a clearer channel. Handset does not display any Caller ID messages. Check with your local telephone company to make sure Call Walling Caller II} service is being provided on your telephone tine.
SERVICE According to FCC regulations, this equipment, which has been certified and registered by the FCC, may only be repaired by authorized persons. If repairs or adjustments are made by an unauthorized person, the FCG certification may be voided, Should you encounter any problems, please call the Francophone toll-free Customer Help Line for assistance: 1-800-366-0837, Monday ~ Friday between the hours of 8:30 am — 9:00 pm (EST) and Saturday between the hours of 8:30 am 12:30 pin (EST).