User Manual CONTINENTAL WLC Wireless Power Charger WLC-CEM02
1. System description Continental Wireless Power Charger is developed for automotive applications under the name WLC.
WPC parameters Parameters Carrier frequency Frequency shift Supply voltage Voltage supply range Max. supply power Operating temperature range* Smartphone operating temperature range Max. Output Power on receiver load** WPC chipset brand WPC litz coil WPC litz coil gain @ 126.7kHz Dimensions (X/Y/Z in mm) Product weight Vehicle fuse protection Values 126.7 kHz +/-6 kHz 13.5V battery 8V < VBAT < 16V 33W -40°C < Temp < 85°C -20°C < Temp < 60°C 11W Renesas Single coil MPA14 according to Qi standard -108.
Vehicle installation Although the WLC module is intended for different vehicles, it is always installed in the vehicle front central console (see an example in Figure 7). Figure 7. Location of WLC inside the vehicle The installation with the shortest distance to the human body is illustrated in Figure 8: 11.26cm. Figure 8.
Warning statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.