User Manual

3.3 Associating a Function with a Shuttle Component
When you modify an existing or newly created setting, you want to modify the function
associated with the Shuttle components.
These steps are general and we will refer to this paragraph often hereafter.
1. Click on the Application Setting Menu and select the application setting you want to modify.
2. Through the User Action Menu, select the Shuttle component you want to assign the
function to. You can choose between:
 button
 jog
 Shuttle position
 Shuttle transition.
3. Click on the Computer Response Menu and select the function you wish the Shuttle
component to perform. Choose according to the following table, depending on the Mac
version you are using:
Button Jog Direction Shuttle Position Shuttle Transition
Do Nothing X X X X
Same as Lower Value NA NA X NA
Switch Settings X X X X
Type Keystroke X X X X
Press Modifier Keys X X X X
Open File or Folder X X X X
Scroll Up X X X X
Scroll Down X X X X
Scroll Left X X X X
Scroll Right X X X X
Mouse Click X X X X
Double Click X X X X
Triple Click X X X X
Click Lock X X X X
Right Click X X X X
Middle Click X X X X
Volume Up X X X X
Volume Down X X X X
Mute Volume X X X X
Brightness Up X X X X
Brightness Down X X X X
Eject X X X X
Run Macro X (*) X (*) X (*) X (*)
(*) Only available for ShuttlePRO v2
Table 1 Computer Response
4. Add a description of the requested action in the Comment Field.
Contour Shuttle Multimedia Controllers 12