User Manual

5.2 Rename Settings
If you want to rename an application setting:
1. Click on the Target Application Menu and select the application setting you would like to
rename. (You should now see this setting name in the Target Application Menu).
2. Click on the Options button in the Settings Management section. The setting you selected in
step 1 should be highlighted. Select Rename Settings from the pull-down menu.
3. Enter a name of your choice (up to 31 characters) in the Target Application field. You MUST
use a different name for each setting.
4. Press Enter on your keyboard to save the new name.
5. Click Apply to validate the change.
5.3 Change Target Application
If you want to change the target application (the executable file to which the setting is related):
1. Click on the Target Application Menu and select the application setting that you would like
to associate to another application. (After so doing, you should now see this setting name
highlighted in the Target Application Menu).
2. Click on the Options button in the Settings Management section. Select Change target
application from the pull-down menu.
3. A dialog box will prompt you to locate the target application. Select the application you want
and click Open in the right hand of the dialog box.
4. Click Apply to validate the change.
5.4 Change Target Device
By default all settings are targeted to all devices.
For multiple-mode applications that have more than one setting, you can tag settings either to
be primary-device specific or secondary-device specific, so that they will be used only by the
corresponding device.
1. Click on the Target Application Menu and select the application setting you would like to
tag. You should now see this setting name highlighted in the Target Application Menu.
2. Click on the Options button in the Settings Management section. Select Change target
device from the pull-down menu.
Contour Shuttle Multimedia Controllers 20