User Manual

1.1.1
1.1.2
System Requirements
• System running Windows 98, 98SE, ME, 2000 or XP.
• Available USB port. (A direct USB port connection is desirable, but a hub connection will
also work. Contour recommends using powered hubs and against using conversion
devices, such as USB adapters.)
• 10 Mbyte of hard disk space for the Shuttle device driver installation.
Installation Procedure
Notes:
1) It is recommended that you close all other applications that may be running on your
system and that you disable any virus protection software until after the installation is
complete.
2) If you have any previous Shuttle devices driver installed on your system, please refer to
paragraph 7 (Updating or Uninstalling your Shuttle device Software) before proceeding.
3) For Windows 2000 and XP users:
installing the driver requires system-administrator
security privileges.
Step 1.
Step 2.
Locate and double-click the Contour Shuttle device driver installer.
A dialog box will prompt you through the installation process. Once installation is
complete you should receive a message stating, “Contour Shuttle Device Driver has
been successfully installed. Press the Finish button to exit Setup program.”
Fig. 1-4
Note:
A restart is NOT necessary after the installation is complete.
Contour Shuttle Multimedia Controllers 3