Product Guide 1
Quick Start About the Camera a b c d e f g h i j k l 2 Power Button Battery Status Record Button Rotating Lens Record Status Memory Status Resolution Switch USB Charge Indicator Battery Latch Battery Slot MicroSD card ContourHD1080p
Getting Ready • Open the back door. • Insert battery with (+) aligned and close latch. • Align back door slightly above camera and slide down until it locks in. Power Up • Push power button. • Camera beeps and lights turn off. • You are ready to record. Note: Power up with record switch forward to enable silent mode.
Record • Start: slide switch forward. • Stop: slide switch back. • Congrats, your first video! Share • Install Easy Edit Software directly from MicroSD card provided or download at: www.VholdR.com/support/software. • Connect camera to computer with USB cable. • Set date and time on your camera using the Easy Edit Software • Then import, clip and share your videos… Note: HD is beautiful but some computers cannot play smooth HD video. Visit www.vholdr.
Video Use switch under back door to select video resolution. Default Resolutions: HI: 1920 x 1080 @ 30 fps LO: 1280 x 960 @ 30 fps Alternate Resolutions: 1280 x 720 @ 30 fps 1280 x 720 or 848 x 480 @ 60 fps Use Easy Edit Software to select alternate resolutions, adjust video and mic settings, and set camera time. Power Recharge • Connect to computer with USB cable. • Red light indicates charging. • Charge complete when camera beeps and red light turns off.
Status Press power button to check status. • Memory / Battery Available Green > 80% Yellow 20-80% Red < 20% • Record Status Green = ready Red = recording Flashing = memory full or corrupt 2GB microSD card included. Accepts up to 16GB microSD. (SDHC compatible) Error Conditions • Time invalid: Memory/battery flash red at power on. • Memory full: (3) beeps, recording stops. • Memory corrupt: (3) beeps, shuts off. • No card or memory corrupt: (3) beeps, shuts off.
Flat Surface Mount • Unhook leash on base and loop through camera. • Slide camera onto rails until completely forward. • Adhere mount to flat surface (top or side of helmet recommended). • Hold base, pull camera away, rotate to align, and press into mount to reattach.
Goggle Mount • Slide camera on rails until completely forward. • Press thumb on large tab (top of mount) and pull camera away. • Slide goggle strap into base. • Align vertical angle of camera. • Snap rails back into mount over strap.
Align • Press power button to activate lasers. • Aim at your hand, a wall, or other object. • Rotate lens to align lasers horizontally. • Remove and reorient mount rails to adjust mount angle. Aim a little high for the best shot.
Cautions and Warranty This Important Product Information Guide contains regulatory, safety, handling, disposal and recycling information, as well as the 180-day limited warranty for your ContourHD1080p Camera. Read all safety information below and operating instructions before using ContourHD1080p Camera to avoid injury. For detailed operating instructions and the latest Important Product Information Guide, go to: www.vholdr.com/support.
ContourHD1080p uses a rechargeable lithium-ion, 3.7V, 1050mAh battery. Do not use batteries other than those specifically designed for the ContourHD1080p. Use of any other battery may invalidate the warranty provided by Twenty20, Inc. and may present a risk of fire or explosion. To charge, only use the ContourHD1080p USB Cable with a high power USB port on a computer or other device that is compliant with the USB 2.0 or 1.1 standards, or a ContourHD1080p wall, car or battery charger.
FCC information ContourHD1080p Wearable Camcorder Model: 1300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modification to this unit not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase separation between equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Laser Notice ContourHD1080p is a Class II laser device. Laser radiation is emitted from the ContourHD1080p when using the lasers for alignment. Please use caution and do not stare directly into the beam or point at others. Repairing or Modifying Never attempt to repair or modify ContourHD1080p Camera yourself. Disassembling ContourHD1080p Camera, including the removal of external screws, may cause damage that is not covered under the warranty.
TWENTY20, INC. LIMITED WARRANTY Twenty20, Inc. (“Manufacturer”) warrants to the original end user (“Purchaser”) that for the 180 days (“Warranty Period”), the ContourHD1080p Wearable Camcorder (excluding any third party software) and accessories (“Product”) will be free from defects in materials and workmanship when properly installed and used for its intended purpose and in its intended operating environment.
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to Purchaser.
The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to Purchaser.
Tips & Troubleshooting We want to help you have a great ContourHD1080p experience so please contact us with any questions you have. Hours: Monday – Friday (9am to 6pm PST) Toll Free: 866.397.6920 (USA) International: 206.792.5226 Email: support@vholdr.com Web: www.vholdr.com/support All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders. ContourHD1080p is a product of Twenty20 Corporation in Seattle, Washington. www.vholdr.
We are here to help Keeping Shoot and Share simple is what we are all about. We would love to help you have a great ContourHD1080p experience so please contact us with any questions you have. How to get Service To obtain warranty service, register your product at www.vholdr.com within 180 days from the date you purchased this product.
