Installation Instructions

1
way to a maintenance free handrail system that is easily
With your Wolf Handrail system, you’ll feel safe being protected by
aluminum alloy components, plus be comforted knowing the
will last year after year.
ore you begin assembling your Wolf Handrail.
Handrail box against the packing list adhered to the back of the Wolf
the components of your new Wolf
www.Contractorhandrail.com (for installation Video)
5
7
1. Ensuring the gap from the top of the floor or deck to the bottom of the
bottom channel (A) is less than 4 inches, and that the top of the rail meets
your minimum code requirements vertically center your EZ handrail. Then
attach one of the bottom post mounts (G) to the existing post or EZ post
using the proper fasteners (C) provided. (Hint: Using a 2x4 (3 ½ in.width)
board cut at 3 ¾”, set handrail section on the 2x4 board for correct height.
Reminder: Typical residential minimum handrail height is 36” and the
minimum height for commercial handrail is 42”.
2. Ensuring your EZ handrail is centered vertically on the post; fasten the top
post mount (F) using the proper fasteners provided.
3. Now move to the other end of the railing section. Using the level (or placing
your railing on a 2x4 board) ensure your EZ Handrail section is set at the
required height, vertically centered and fasten the 2
nd
bottom post mount
using the proper fasteners provided.
4.
Ensuring your EZ handrail is centered vertically on the post fasten the 2nd
top post mount using the proper fasteners provided.
5. Finally, fasten the post mounts (F & G) to the top snap (D) and bottom
D
F
G
A
C (TYP)
See pg 4
See pg. 4
1. Ensuring the gap from the top of the floor or deck to the bottom of the
bottom channel (A) is less than 4 inches, and that the top of the rail meets
your minimum code requirements vertically center your handrail. Then
attach one of the bottom post mounts (G) to the existing post or
post using the proper fasteners (C) provided. (Hint: Using a 2x4
(3 ½ in.width) set handrail section on the 2x4 board for correct height.
Reminder: Typical residential minimum handrail height is 36”
and the minimum height for commercial handrail is 42”.
2. Ensuring your handrail
is centered vertically on the post; fasten the
top post mount (F) using the proper fasteners provided.
3. Now move to the other end of the railing section. Using the level (or placing
your railing on a 2x4 board) ensure your handrail section is set at
the required height, vertically centered and fasten the 2
nd
bottom post
mount using the proper fasteners provided.
4. ensuring your handrail is centered vertically on the post fasten the 2nd
top post mount using the proper fasteners provided.
Finally, fasten the top post mounts (F) and top snap (D) on each side of
the top post mounts using the 1” self tapping fasteners provided.
Note: Refer to Page 4 for Contractor Post installation
Step
4