Instructions / Assembly

STEP 13 Cleaning and Removing

the Door Panels

The enclosure door panels are not designed to be

removed once they are installed. However, inconvenient

areas that you may want to clean, such as the overlap

between the doors, can still be reached for cleaning.

A. Clean the glass and Bottom Track/Curb (#2) with

a mild, non-abrasive cleaner.

CAUTION: Removing one or both of the panels should NOT

be attempted without assistance. Always wear

safety goggles and gloves when handling the

glass panels. Read through the following instruc-

tions first to familiarize yourself before proceed-

ing.

B. Carefully remove any silicone caulking from

around the Header (#1).

C. Remove the #6 x 3/8″ PH SMS Screw (#14) from

the Header (#1). You should now be able to raise

the Header (#1) enough to lift the panels out of the

Panel Guide (#7) and disengage them from the

Header (#1).

D. To re-install the Door Panels (#5 and #6), reverse

the process described above: hang the Panels in

the Header (#1) and re-attach the Header (#1)

onto the Wall Jambs (#3) with two #6 x 3/8″ PH

SMS Screw (#14).

#500 - I0500 - 0703

Thank you for purchasing a CW

Shower Enclosure.

This is only one of a large line of shower enclosures

and high quality wardrobe door products. If you like

this product, please contact Contractors Wa r d r o b e

for more information about our many beautiful

wardrobe doors in bi-pass and bi-fold styles with

steel, aluminum and hardwood frames.

500 Install. Instruc. 7/1/03 8:24 PM Page 7