Instructions / Assembly

ManualsBrandsContractors Wardrobe ManualsDoors & Windows96 in. x 96 in. Concord Bright Clear Aluminum Framed Mirror Sliding Door

Installation Instructions

Mod e l C o n c o r d

™

DESIGNERS • MANUFACTURERS

26121 Avenue Hall • Valencia, CA 91355 • (661) 257-1177

FAX: (661) 257-4907

or visit our website at: www.cwdoor.com

Concord - Web 3/20/03 11:16 AM Page 1

Summary of content (5 pages)

PAGE 1
Concord - Web 3/20/03 11:16 AM Page 1 Installation Instructions Model Concord ® ™ DESIGNERS • MANUFACTURERS 26121 Avenue Hall • Valencia, CA 91355 • (661) 257-1177 FAX: (661) 257-4907 or visit our website at: www.cwdoor.
PAGE 2
Concord - Web 3/20/03 11:16 AM Page 2 ILLUSTRATED PARTS BREAKDOWN (IPB) MODEL Concord ™ 2 11 5 Top Guide Bracket (#5) (Enlarged View) 6 12 5 6 8 5 14 12 6 5 15 1 14 14 14 15 15 13 14 13 1 12 14 14 7 8 13 15 14 7 14 13 11 12 9,10 7 9,10 4 11 9,10 3 Steel Wheel Assembly (#13) NO.
PAGE 3
Concord - Web 3/20/03 11:16 AM Page 3 Congratulations on purchasing your new CW® Wardrobe Doors. Now that you have opened the package, we want you to verify that you have all the necessary hardware supplied with your doors. PARTS CHECK LIST: NO.
PAGE 4
Concord - Web 3/20/03 11:16 AM Page 4 INSTALLING THE DOORS Step 1 Removing Existing Wardrobe Doors B. Locate Wood Strip (#4) supplied in kit and measure inside bottom closet opening and cut to length. C. Find the correct offset measurement using the Offset Measuring Table on Page 3 (B Measurement) for your particular installation. From the front edge of closet opening inward, measure using dimension from table and make a pencil mark on wall. Do this on both walls, i.e.
PAGE 5
Concord - Web 3/20/03 Step 4 11:16 AM Page 5 Installing the Mirrored Glass Panels A. Make sure you have a pad or blanket to protect the Mirrored Glass Panels (#1) from scratches. Lay Panels (#1) with backside up on the floor. Locate one of the Steel Wheel Assemblies (#13) on the bottom of a Panel (#1). With a Phillips Screwdriver, turn the adjusting screw to the right to lower the roller. Do this until you have 1″ of roller showing.