Instructions / Assembly

ManualsBrandsContractors Wardrobe ManualsKitchenSilhouette 5 Lite Aluminum Bronze Finish Interior Bypass Sliding Door

Installation Instructions

Mod e l C o n c o rd

™

and Silhouette

™

DESIGNERS • MANUFACTURERS

26121 Avenue Hall • Valencia, CA 91355

TOLL FREE: (800) CW-DOORS ((800) 293-6677)

(661) 257-1177 • FAX: (661) 257-4907

or visit our website at: www.cwdoor.com

Concord/Silhouette Instructions 8/1/06 10:47 AM Page 1

Summary of content (6 pages)

PAGE 1
Concord/Silhouette Instructions 8/1/06 10:47 AM Page 1 Installation Instructions Model Concord and Silhouette ® ™ DESIGNERS • MANUFACTURERS 26121 Avenue Hall • Valencia, CA 91355 TOLL FREE: (800) CW-DOORS ((800) 293-6677) (661) 257-1177 • FAX: (661) 257-4907 or visit our website at: www.cwdoor.
PAGE 2
Concord/Silhouette Instructions 8/1/06 10:48 AM Page 2 ILLUSTRATED PARTS BREAKDOWN (IPB) MODEL Concord / Silhouette 2 ™ 11 ™ Top Guide Bracket (#5) (Enlarged View) 5 6 12 5 6 8 5 14 12 6 15 1 5 A 14 14 14 15 15 13 14 A 1 13 12 A A 14 14 7 8 13 15 14 14 A 7 11 12 13 A 9,10 7 9,10 4 Steel Wheel Assembly (#13) NO.
PAGE 3
Concord/Silhouette Instructions 8/1/06 10:48 AM Page 3 FLOOR CHECK LIST Congratulations on purchasing your new CW ® Wardrobe Doors. Now that you have opened the package, we want you to verify that you have all the necessary hardware supplied with your doors. 1. Do you have carpet? It is highly recommended that if you have carpet and do not have a cut-out in the carpet already, you should cut the carpet in order to install the Bottom Track (#3).
PAGE 4
Concord/Silhouette Instructions 8/1/06 10:48 AM Page 4 INSTALLING THE DOORS Step 3 * Before you get started if you purchased our Silhouette™ model it is almost the same as our Concord™ model. Any differences are noted with a Silhouette™ Flag S . If you see this flag during an installation step please turn to Supplemental Page 6 for that installation section. Step 1 Removing Existing Wardrobe Doors A.
PAGE 5
Concord/Silhouette Instructions Step 4 A. S 8/1/06 10:48 AM Page 5 Installing the Mirrored Glass Panels (Concord ™ only) Make sure you have a pad or blanket to protect the Mirrored Glass Panels (#1) from scratches. Lay Mirrored Glass Panels (#1) with backside up on the floor. Locate one of the Steel Wheel Assemblies (#13) on the bottom of a Mirrored Glass Panel ( # 1 ). With a Phillips Screwdriver, turn the adjusting screw to the right to lower the roller. Do this until you have 1″ of roller showing.
PAGE 6
Concord/Silhouette Instructions 8/1/06 10:48 AM Page 6 SILHOUETTE ™ SUPPLEMENTAL PARTS LIST #1 Tempered Glass Panels #1 #12 Bottom Mold (Top Mold same as Concord ™) #13 Concealed Wheel Assembly S Step 4 A. Installing the Tempered Glass Panels #13 Make sure you have a pad or blanket to protect the Tempered Glass Panels (#1) from scratches. Lay Tempered Glass Panels (#1) with backside up on the floor. Locate one of the Concealed Wheel Assemblies (#13) on the bottom of a Tempered Glass Panel (#1).