Instructions / Assembly

ManualsBrandsContractors Wardrobe ManualsCloset Doors84 in. x 80-1/2 in. Style Lite Bright Clear Aluminum Frame Mirrored Interior Sliding Closet Door

Installation Instructions

Model Style Lite

Contractors Wardrobe

DESIGNERS • MANUFACTURERS • TOLL FREE: (800) CW-DOORS • (800) 293-6677 • www.cwdoor.com

26121 Avenue Hall • Valencia, CA 91355 • (661) 257-1177 • FAX: (661) 257-4907

Style Lite Instructions 3/22/08 12:52 AM Page 1

Summary of content (5 pages)

PAGE 1
Style Lite Instructions 3/22/08 12:52 AM Page 1 Installation Instructions Model Style Lite ® Contractors Wardrobe ® DESIGNERS • MANUFACTURERS • TOLL FREE: (800) CW-DOORS • (800) 293-6677 • www.cwdoor.
PAGE 2
Style Lite Instructions 3/22/08 12:52 AM Page 2 Illustrated Parts Breakdown (IPB) Model Style Lite ® 6 5 2 13 16 6 6 5 5 12 12 15 12 16 5 1 6 9 13 15 16 16 16 1 15 12 16 8 15 Steel Wheel Assembly (#14) 14 15 14 9 16 15 15 8 14 15 15 6 14 15 7 15 13 7 15 6 13 6 3 NO.
PAGE 3
Style Lite Instructions 3/22/08 12:52 AM Page 3 Congratulations on purchasing your new CW ® Wardrobe Doors. Now that you have opened the package, we want you to verify that you have all the necessary hardware supplied with your doors. FLOOR CHECK LIST 1. Do you have carpet? It is highly recommended that if you have carpet and do not have a cut-out in the carpet already, you should cut the carpet in order to install the Bottom Track (#3).
PAGE 4
Style Lite Instructions 3/22/08 12:52 AM Page 4 INSTALLING THE DOORS STEP 1 Removing the Existing Doors Remove existing doors, brackets, top channel and bottom track. STEP 2 Installing the Top Channel A. Measure the opening at the top of the closet from wall to wall. B. Cut the new Top Channel (#2) to this dimension. When cutting the Top Channel (#2) we recommend that you use a Miter Box and Hacksaw for a straight cut. Cut one side only.
PAGE 5
Style Lite Instructions B. C. 12:52 AM Page 5 Pick up one Mirrored Panel (#1) and, with the mirror facing you, tilt the top of the Mirrored Panel (#1) back and slip the Mirrored Panel (#1) into the back runner of the Top Channel (#2). Next, set the bottom of the Mirrored Panel (#1) into the back runner of the Bottom Track (#3).