Instructions / Assembly

FLOOR CHECK LIST
1. Do you have carpet?
It is highly recommended that if you have carpet and do
not have a cut-out in the carpet already, you should cut
the carpet in order to install the Bottom Track (#3). We
do not recommend installing the Bottom Track (#3)
directly on top of carpet.
2. Do you have a concrete, wood floor or ceramic
tile floor?
A. If it is a concrete floor, go to 3…
B. If it is a wood floor, go to 4…
C. If it is a ceramic tile floor, go to 5…
3. If you have a concrete floor you will: Use Concrete
Nails (#9) to attach Wood Strip (#4) to floor.
4. If you have a wood floor you will: Use 5 Penny
Nails (#10) to attach Wood Strip (#4) to wood floor.
5. If you have a ceramic tile floor you will: Drill holes
with a 3/16″ Masonry Drill Bit. Insert Screw Anchors and
attach Wood Strip (#4) to floor with Screws. Or, you may
glue the Wood Strip (#4) down with panel A d h e s i v e .
NOTE: Drill Bit, Screws, Screw Anchors and Adhesive
are not supplied.
TRACK OFFSET MEASUREMENTS FROM FACE
OF OPENING TO FRONT EDGE OF TRACK
Track Offset A B
All Ultraglide
®
track and channel
Style Lite
®
Doors 5/8″ 1-5/8″
Congratulations on purchasing your new CW
®
Wardrobe
Doors. Now that you have opened the package, we want
you to verify that you have all the necessary hardware
supplied with your doors.
PARTS CHECK LIST:
NO. QTY DESCRIPTION
(#1) 2 Mirrored Glass Panels
(#2) 1 Top Channel
(#3) 1 Bottom Track
(#4) 1 Wood Strip (Located inside of track)
(#5) 6 #8 x 1-1/2″ Screws
(#6) 8 #8 x 3/4″ Hex Head Screws
(#7) 4 #8 x 1/2″ Truss Screws
(#8) 2 Mirror Handles (Attached to back of panels)
(#9) 2 Clear Plastic Bumpers
(#10) 4 Concrete Nails
(#11) 4 5 Penny Nails
If you find that any parts are damaged or missing, refer to
the parts list and IPB Drawing and contact
Contractors Wardrobe
®
’s Customer Service Department
at [phone].
TOOL CHECK LIST
You will need:
• Phillips Screwdriver
• Tape Measure
• Hammer
• Pencil
• 3/8″ Drill Motor and 3/16″ and 1/8″ Drill Bits
• Miter Box and Hacksaw
• Square
• Glass Cutter (For optional mirror fascia)
• Four 1″ Screws and Screw Anchors
(For ceramic tile floors only. See Floor Check List #5.)
• Adhesive (For ceramic tile floors only. See Floor
Check List #5.)
PENCIL MARK TO
LOCATE FRONT EDGE
OF WOOD STRIP
BOTTOM
TRACK
WOOD
STRIP
FACE OF
OPENING
3
Style Lite
®
- 0308
Style Lite Instructions 3/22/08 12:52 AM Page 3