Owner manual

4 - 6

Keypad Test #3 - To Test the Keypad

Press the “UP” or “DOWN” scroll keys until the diagnostic indicator and

the number “3” are visible on the left side of the LED display.

Press “Enter” to start the test. The ML-Drive displays the number “15”

for the “Enter” key.

Press each of the keypad keys and verify against the following list:

Press Display

––

CODE SELECT 10

SETPOINT 11

TACH 12

▲ 13

▼ 14

ENTER 15

* CLEAR No display

* If “Clear” is functioning, pressing “Clear” will take you out of the

Keypad test. If “Clear” is not functioning, it will not take you out of the

test and the number of the prior key will remain on the LED display.

Press “Clear” to exit the test.

Press “CODE SELECT” only if you want to exit diagnostics.