INDEX Editorial................................................. Page 3 In-wall mounting sets......................... Page 14 - Quality meets diversity!............................... Page 3 - In-wall mounting sets EDIZIOdue................. Page 14 - Measurements for mounting plates and sets.... Page 4 - Colour options for EDIZIOdue..................... Page 17 FLF assortment....................................... Page 5 on-wall mounting plates.....................
edi t o r i a l Dear Customer Mounting plates and sets in various dimensions and designs have been part of the standard equipment used by installers and electricians for many years and are therefore also included in our assortment. If you have any questions or suggestions regarding our product range, our expert service will be at your disposal. Please do not hesitate to contact us by telephone or email. Quality meets diversity! Sincerely, Contrik AG Custom-made products are the order of the day.
R3 m 19 mm ax . Dimensions of flf1- and FLF2 mounting plates r = 12 mm 62.5 mm 62.5 mm 0 54 +0.5 62.5 mm 2 mm 6 mm Ø = 3 mm 32 +0.5 0 37.5 mm 37.
flf/vga/5bnc White FLF mounting plate, equipped with one VGA 15-pole D-Sub „HD” jack and 5x rearTWIST BNC Tiny female (RGBHV) on breakout cable. FLF mounting plates with breakout cables FLF mounting plates and sets in various designs have been part of the standard equipment used by installers and electricians for many years and are therefore also included in our assortment. They are suitable for applications in schools, offices, conference and meeting rooms, theatres etc.
unequipped or single equipped FLF mounting plates FLF1-Blind FLF/vga-s FLF1 FLF1/XL FLF dummy plate with metal clamps (FLF1-BLIND-SW). FLF mounting plate with one cut-out for one 9-pole or 15-pole D-Sub „HD”. Without connector (FLF/VGA-S-SW). FLF mounting plate with one cut-out for one D-series chassis connector, including mounting screws. Without connector (FLF1-SCHWARZ). FLF mounting plate with a cut-out for one large Neutrik powerCON (NAC3FPX) connector. Without connector (FLF1/ XL-SW).
FLF/DVI-SW Black FLF mounting plate, equipped with one DVI-I feed-through female/ female. single equipped FLF mounting plates FLF/bnc FLF/2bnc FLF/ap-montage FLF2/5bnc FLF mounting plate, equipped with one BNC feed-through female/female (FLF/BNC-SW). FLF mounting plate, equipped with 2x 75 Ω (ohm) BNC feed-throughs female/female (FLF/2BNC-SW). FLF on-wall housing with lateral cable outlet, including mounting frame but without FLF inset (FLF/AP-MONT-SW).
single equipped FLF mounting plates FLF/VGA-SKA-SW FLF/VGA-SKA FLF/DVI FLF/AMX Black FLF mounting plate, equipped with one VGA female chassis connector, with screw terminals on the rear side. White FLF mounting plate, equipped with one VGA female chassis connector, with screw terminals on the rear side. White FLF mounting plate, equipped with one DVI-I feedthrough female/female.
All BNCs have an impedance of 75 Ω (ohm). Some FLF mounting plates and on-wall mounting sets are available in white or black. multiple equipped FLF mounting plates FLF/1CINCH/VGA FLF/2cinch/VGA FLF/3.5/vga FLF/2ci/3.5/vga FLF mounting plate, equipped with one gold-plated phono jack (yellow) with solder terminal and one VGA 15-pole D-Sub „HD” feed-through female/female.
9 mm 9 mm 16 mm ABC ABC AB 19 mm ABC 9 mm ABC 9 mm . 9 mm FLF mounting plates with engraving 37.5 mm 37.5 mm FLF mounting sets can also be engraved. They are processed in our workshop with a Gravograph machine. The standard font is SL513 INTERN, which has a size of approx. 3.5 mm. White FLF are labelled with black letters whereas black FLF are labelled with white letters. We can engrave a maximum of 13 characters including blanks. [ Page 1 0 ] 10 mm 10 mm 62.
FLF connection boxes are ideally suited for installations at work stations (below, on or under the desk), in conference and meeting rooms, in false floors and also as terminal point for any sort of application. FLF Boxes Box-4flf-6d BOX-3FLF BOX-4FLF-EL-SW White, unequipped connection box made of powder-coated sheet steel for wall mounting, with 4x FLF cut-outs, 6x D-series cut-outs and rear cable inlet. Dimensions: 61 x 95 x 207 mm.
19” flf Patch fields P6-flf-gr-1he P6-FLF-SW-1HE Light grey, unequipped 19” connector panel made of steel, 1 RU, with 6x FLF cut-outs. Matt black, unequipped 19” connector panel made of steel, 1 RU, with 6x FLF cut-outs. P10-FLF-GR-2HE P10-FLF-SW-2HE Light grey, unequipped 19” connector panel made of steel, 2 RU, with 10x FLF cut-outs and one labelling strip. Matt black, unequipped 19” connector panel made of steel, 2 RU, with 10x FLF cut-outs and one labelling strip.
Splitters and matchers are suitable for floor connection boxes. The installation depth measures 50 mm. FLF with balancers Connection Input volt. Output volt. Connection Input volt. Output volt. XLR (Combo) st. Phono stereo Plug stereo 6.
in-wall mounting sets EDIZIODUE UP1-ED UP2-ED UP-ED/VGA-SKA UP-ED/VGA In-wall mounting set with one cut-out for one D-series chassis connector incl. mounting plate with M3 thread, incl. mounting screws and one cover frame (UP1-ED-SW / UP1-ED-GR). In-wall mounting set with 2x cut-outs for D-series chassis connectors incl. mounting plate with M3 thread, including mounting screws and one cover frame (UP2-ED-SW / UP2-ED-GR).
On your request, we will gladly equip on- and in-wall mounting sets with specified connectors in our workshop. in-wall mounting sets EDIZIODUE UP-ED/2CINCHVGA UP-ED/1CINCHVGA UP-ED/2CINCHBNC UP-ED-BLIND In-wall mounting set with one VGA 15-pole D-Sub „HD“ feedthrough female/female, 2x goldplated phono jacks, solder terminals and one cover frame (UP-ED/2CIVGA-SW/UPED/2CIVGA-GR).
in-wall mounting sets EDIZIODUE UP-ED/HDMI-aktiv UP-ED/HDMI UP-ED/HDMISKA UP-ED/2USB In-wall mounting set, replacing the receiver SP-2xCAT5RX-IR. Operates together with the transmitter SP-2xCAT5TX-IR and comes with one cover frame (1920x1080p = 60 m). In-wall mounting set with one HDMI feed-through female/female and one cover frame made of plastic (UP-ED/HDMI-SW).
Depending on the plaster or paint, Contrik AG also supplies EDIZIOdue in colour in order to blend the mounting sets nicely with their surroundings. In the table below you will find the available colours according to NCS (Natural Color System). The colours shown are not colour proof. Minimum order quantity: 5 pieces. colour options for mounting plates Ediziodue f l f, i n - & o n - wa ll Colour Order No. acc. NCS Colour Order No. acc.
On-wall mounting plates EDIZIODUE AP1-ED AP2-ED AP2-ED-SW AP-ED/RAHMEN On-wall mounting set with one cut-out for one D-series connector, one mounting plate with M3 thread, including mounting screws and one cover frame (AP1-ED-SW). On-wall mounting set with 2x cut-outs for D-series chassis connectors, one mounting plate with M3 thread, including mounting screws and one cover frame. On-wall mounting set with 2x cut-outs for D-series chassis connectors, one mounting plate with M3 thread, inlc.
AP-ED/HDMI-KBS On-wall mounting set EDIZIOdue with one short HDMI breakout cable (female/ female) of approx. 10 cm length and one cover frame made of plastic. In- & on-wall mounting plates basico UP1 UP2 UP1-nass UP2-NASS In-wall mounting plate with one cut-out for 1x D-series chassis connector and one mounting plate with M3 thread, incl. mounting screws and plastic cover frame.
© Contrik AG, Version EN-1/2014
