Datasheet

UP1
In-wall mounting plate with one
cut-out for 1x D-series chassis
connector and one mounting
plate with M3 thread, incl.
mounting screws and plastic
cover frame.
AP-RAHMEN
On-wall mounting frame BASI-
CO made of plastic, suitable for
in-wall mounting sets UP1 and
UP2.
UP2
In-wall mounting set with 2x
cut-outs for D-series chassis
connectors and one mounting
plate with M3 thread, including
mounting screws and plastic
cover frame.
AP-50
On-wall mounting frame made
of plastic, suitable for in-wall
mounting sets UP1 and UP2.
UP1-NASS
In-wall mounting set with one
cut-out for 1x D-series chassis
connector, one mounting plate
with M3 thread, incl. INOX A4
mounting screws and plastic
cover frame with ap (IP65).
AP1-NASS
On-wall mounting set with one
cut-out for one D-series chassis
connector, one mounting plate
with M3 thread, including INOX
A4 mounting screws and plastic
cover frame with ap (IP55).
UP2-NASS
In-wall mounting set with 2x
cut-outs for D-series chassis
connectors, one mounting plate
with M3 thread, including INOX
A4 mounting screws and plastic
cover frame (IP55).
AP2-NASS
On-wall mounting set with 2x
cut-outs for D-series chassis
connectors, one mounting plate
with M3 thread, incl. INOX A4
mounting screws and plastic
cover frame with ap (IP55).
IN- & ON-WALL MOUNTING PLATES BASICO
AP-ED/HDMI-KBS
On-wall mounting set EDIZIOdue with
one short HDMI breakout cable (female/
female) of approx. 10 cm length and
one cover frame made of plastic.
flf, in- & on-wall
[ Page 19 ]