Datasheet

UNEQUIPPED OR SINGLE EQUIPPED FLF MOUNTING PLATES
FLF1-BLIND
FLF dummy plate with metal
clamps (FLF1-BLIND-SW).
FLF1-SCHALT
FLF mounting plate with illumi-
nated pressure switch, type 13,
10A, 230VAC. When switching
on/off, phase or ground can be
switched. (FLF1-SCHALT-SW).
FLF/VGA-S
FLF mounting plate with one
cut-out for one 9-pole or
15-pole D-Sub „HD”. Without
connector (FLF/VGA-S-SW).
FLF/3.5
FLF mounting plate, equipped
with one silver-plated 3.5 mm
stereo mini jack with solder
terminal (FLF/3.5-SW).
FLF1
FLF mounting plate with one
cut-out for one D-series chassis
connector, including mounting
screws. Without connector
(FLF1-SCHWARZ).
FLF/2CINCH
FLF mounting plate, equipped
with 2x gold-plated phono jacks
(black/red) with solder terminals
(FLF/2CHINCH-SW).
FLF1/XL
FLF mounting plate with a
cut-out for one large Neutrik
powerCON (NAC3FPX) connec-
tor. Without connector (FLF1/
XL-SW).
FLF/3CINCH
FLF mounting plate, equipped
with 3x gold-plated phono jacks
(black/red/yellow) with solder
terminals (FLF/3CINCH-SW).
[ Page 6 ]