Datasheet

ACCESSORIES
SENSOR TESTER
ATE-0000-010_Rev 1_26.06.15_PYD
CONTRINEX AG Industrial Electronics
Route André Piller 50 - CH 1762 Givisiez - Switzerland - Tel: [phone] -
Fax: [phone] - Internet: www.contrinex.com - E-mail: [e-mail]
These devices must not be used in applications where the safety of people is dependent on their functioning. Terms of delivery and rights to
change design reserved.
GENERAL DATA INTERFACE
Sensor supply voltage 24 VDC LED, green Supply voltage
Max. sensor supply current 100 mA LED, green blinking (1 Hz) Low battery (< 15% full)
Output types PNP, NPN and push-pull LED, green blinking (4 Hz) Charging, phase 1 (≤ 90% full)
Current limit
ü
LED, green blinking (2 Hz) Charging, phase 2 (> 90% full)
Rechargeable battery type LiPo 9V (min 500 mAh) LED, yellow Output state
Standard battery type Alkaline 6LR61 9V Micro-USB interface for charger
ü
Rechargeable battery included LiPo 9V 600 mAh Charger type (not included) Universal mobile phone charger
Battery life (600 mAh) > 2 hours at 50 mA Acoustic signal output off -> on 2’800 Hz
Charging time (at 500 mA) < 5 hours Acoustic signal output on -> off 2’400 Hz
Automatic switch off After ~120 seconds of non-use
Enclosure rating IP40
Weight (battery included) 96 g
ATE-0000-010
ü Fast field check of various
sensor types
üLED and acoustic indicator
ü Current supply to 100 mA
ü Rechargeable battery
ü Adapted to universal
micro-USB charger
61
106
123
22
AVAILABLE TYPES
Part number Part reference Description
600 000 033 ATE-0000-010 Sensor Tester with rechargeable battery LiPo 9V 600 mAh
622 000 016 AAL-0000-010 Additional rechargeable battery LiPo 9V 600 mAh
Note: additional suffix can appear to indicate a revision version or a special version.