User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 154 of 199
d. Define the Control connections for the DVD player to the Controller.
Example: In the Connections view under Theater, click DVD. The right top pane displays all the
inputs and outputs on the back of the DVD. From the top pane, do the following:
In Control Inputs, click IR Sensor (Control—IR_OUT) and drag it to Controller (IR Output 3—
Family) in the bottom pane.
Tip: If you prefer to set up a video sense loop instead of using a macro, see “Changing Power
Management Options.” After you add a video sense loop connection to the DVD player driver,
add a control connection between the Controller and the DVD player.
e. Define the Control connections for the Motorized Screen to the Controller.
Example: In the Connections view under Theater, click Motorized Screen. The top right pane
displays all the inputs and outputs on for the screen.
In the top pane under Control Inputs, click Relay (Control—RELAY), and drag to Controller
(Relay Port 3—Family) in the bottom pane.