User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 23 of 199
Note: If a Controller is not listed in My Drivers, right-click in My Drivers and select Restore Default
List. This action updates the list. See “Using My Drivers or Search Tabs.”
4. In the Connections view, use the Network tab to make the necessary network connections. To do
this, select the Home Controller object, and click the Identify button.
5. In Identify mode, go to the physical Home Controller, and press the specified button (listed below)
on the device to identify the Controller to the Control4 system.
• HC-200 only: Press the LINKS button on the Front of the device.
• HC-300 and HC-800 only: Press the ID button on the Back of the device.
• HC-1000 only: Press the ID button on the Front of the device.
Note: The HC-1000 V3 has a Reset button on the front of the unit also, which differs from HC-
1000 V1 and V2.
Example Home Controller (HC200) identification screen in the Theater: