User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 47 of 199
IMPORTANT TIP: If the device has already been identified on the Control4 system, and you
change the name (on this wizard screen), identify the device again. Until it is identified again, the
Controller cannot recognize the name and will not be able to communicate with the device.
7. Select the type of network you want the device to be a part of, and click Next.
Example: Wireless network.
8. Select the method to obtain an IP address, such as DHCP (first option) or Status IP (second
option) distribution, and click Next.
Example: Obtain an IP address automatically using DHCP.
9. Select the method to obtain the DNS server address automatically, and click Next.
Example: Obtain the DNS server address automatically.
10. Enter the Network Name (SSID) of your wireless access point.
11. Use the pull-down menu to indicate your Data encryption preference (64 or 128 bit).
12. Select the Key type (hex or ASCII).
13. Enter your Network Key (WEP Key), and click Test.
• Hex: 64 bit (10 digits) or 128 bit (26 digits)—acceptable values 0 - 9, A- F
• ASCII: 64 bit (5 digits) or 128 bit (13 digits)—acceptable values ASCII characters