User guide

Composer Pro User Guide
Copyright © 2012 Control4. All Rights Reserved.
Saved: 1/20/2012 1:31:00 PM
200-00005 Composer Pro
User Guide Part 1
Page 74 of 199
2. Click System Design.
3. In the project tree, right-click the Samsung Television and select Edit Driver. The Driver Wizard
opens.
4. In the Driver Wizard, check Has power feedback.
5. Change the Power Management option to Contact sensor; ensure that the Send toggle code is
selected.
6. Click Codes.
a. In Codes under Default Commands, make sure Power On and Power Off, or Power Toggle
items are not checked. If they are, any programming you do in conjunction with power using
the Wireless Outlet Switch and the television is invalid.
b. Click Finish.
c. Click next to close the window.
IMPORTANT: Don’t click back to check if the selection was saved because it refreshes the screen; in
that case, you will need to redefine what you just defined.
Define the Connection
7. Define the connection between the Wireless Outlet Switch and the plugged-in device (Samsung
Television).
8. To do this, in the Connection > Control & Audio Video Connections pane select the Samsung
Television that is plugged into the Wireless Outlet Switch.
9. From the top screen drag the Contact Sensor connection to the correct sensor on the Wireless
Outlet Switch in the bottom screen.
10. Before you can use power sensing for the plugged-in device, perform Power Learning on the
Wireless Outlet Switch for that plugged-in device on the appropriate outlet.
a. Turn off the device plugged into the Wireless Outlet Switch.