Owner's manual

THE ORIGNINAL LABTOOL® INSTRUCTIONS
SPECIFICATIONS
Size: 4 ½´´ (when closed)
Tools: Pliers, gripper, wire cutter, inches/millimeter ruler, knife,
 le,PhillipsScrewdriver,large/medium/smallscrewdrivers,
 bottle/canopener,nutdriver,woodsaw,andserratedblade
Safety
Features:lockreleasebuttonsandtooland
 handlecovers
A Pliers
B Grippers
C Wire Cutters
DHandle
 Cover
EBottle/Can
Opener
F Phillips
 Screwdriver
GSmall
 Screwdriver
HSerratedBlade
I WoodSaw
J Rulers
KBladeLock
LLargeScrewdriver
MMediumScrewdriver
NNutDriver
O File
PKnifeBlade
Operation
Warning: All tools are extremely sharp. Handle with caution when
opening, closing, and operating individual tools. Open only one tool
at a time.
Pliers and Grippers
1.UnfoldLabtoolbypullinghandlesapart.
2.Continuetounfoldhandlesuntilpliersarecompletelyvisible.
3.Squeezehandlestogethertousetoolaspliersorgrippers.
4.Handlesareinitiallystifftooperateandbecomemoreexiblewithuse.
Warning: Close all other tools and blade components before operat-
ing pliers or grippers.
Wire Cutters
1.UnfoldLabtoolbypulling
handlesapart.
2.Continuetounfoldhandlesuntil
pliersarecompletelyvisible.
3.Insertwireatbaseofpliersand
squeezehandlestogether.
4.Wirecutterscanbeusedwhen
handlesaresemi-open.See
diagram.
a.Insertwireatbase
of pliers.
b.Squeezepliertipstogether
to cut wire.
Warning: Always wear safety protection for eyes when cutting wire.
Keep ngers clear of handles.
Wood Saw, Serrated Blade, Small Screwdriver, Phillips Screwdriver,
Bottle/Can Opener
1.UnfoldLabtoolbypullinghandlesapart.
2.Continuetounfoldhandlesuntilpliersarecompletelyvisible.
3.WithINCHESsideofhandlefacingup,lifthandlecoveronleftsideof
Labtool.
4.Carefullypulldesiredtooloutofhandlecompartment.
5.Toolsareinitiallystifftopulloutandbecomemoreexiblewithusage.
Note:Itmaybenecessarytopresslockreleasebuttononinsideofhandle
topulloutdesiredtoolmoreeasily.
6.Fullyextenddesiredtooluntilaclickisheard.Toolwillbelockedin
place.Closehandlecoverwhileoperatingtool.
Note:Ifdesiredtooldoesnotclicktolockinplace,anothertoolincom-
partmentmaynotbecompletelystored.
7.Tostoretool,presslockreleasebuttononoutsideofhandle,openhan-
dlecover.Foldtoolintohandlecompartmentandclosehandlecover.
Warning: To prevent accidental unlocking of tool, do not press lock
release button during operation.
Knife, File, Large Screwdriver, Medium Screwdriver, Nut Driver
1.WithINCHESsideofhandlefacingup,lifthandlecoveronrightsideof
Labtool.
2.Followsteps3through7abovetousedesiredtool.
WARNING: Always use caution and keep ngers clear when closing
components into the handles.
WARNING: When wire cutting in these positions, keep ngers and
hands clear of approaching handles to avoid getting pinched. Be
alert to dents in handles caused by hard wire. Always wear eye pro-
tection when cutting hard wire.
WARRANTY OR SERVICE
Forwarrantyorservicecontact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281-482-1714
Fax [phone]
Email [e-mail]
www.control3.com
Control Company is ISO 9001
Quality-Certified by DNV and ISO 17025 accredited
as a Calibration Laboratory by A2LA.
Cat. No. 3325
The Original™ Labtool
92-3325-00
Rev 1 072805
© 2005 CONTROL COMPANY