User manual

IEC61131 User and Reference Manual
April 22, 2008
435
5. You may now connect to the IP address assigned to SCADAPack 32 PPP serial port
using an appropriate application and a supported protocol (e.g. Modbus/TCP). In the
example below, Firmware Loader is used to connect over PPP to the SCADAPack 32.
From the PC Communication Settings dialog, the IP address assigned to the
SCADAPack 32 PPP serial port is selected as the Connect to Host.
Disconnecting a PPP Connection
To disconnect a PPP connection made using the Windows PPP Client, do the following:
1. From the Start menu, double click Network and Dial-up Connections from the
Settings group. The Network and Dial-up Connections dialog is displayed.