User guide

Unidrive SP Short Form Guide 41
Issue Number: 2 www.controltechniques.com
Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting Started
Basic parameters
Running the
motor
SMARTCARD
Advanced
parameters
Diagnostics
UL Listing
Information
5.2 Keypad operation
5.2.1 Control buttons
The keypad consists of:
1. Joypad - used to navigate the parameter structure and change parameter values.
2. Mode button - used to change between the display modes – parameter view,
parameter edit, status.
3. Three control buttons - used to control the drive if keypad mode is selected.
4. Help button (SM-Keypad Plus only) - displays text briefly describing the selected
parameter.
The Help button toggles between other display modes and parameter help mode. The
up and down functions on the joypad scroll the help text to allow the whole string to be
viewed. The right and left functions on the joypad have no function when help text is
being viewed.
The display examples in this section show the SM-Keypad 7 segment LED display. The
examples are the same for the SM-Keypad Plus except that the information displayed
on the lower row on the SM-Keypad is displayed on the right hand side of the top row on
the SM-Keypad Plus.
SM-Keypad / SP0 Keypad SM-Keypad Plus
SMARTCARD access taking
place
The decimal point after the
fourth digit in the upper display
will flash.
The symbol ‘CC’ will appear in
the lower left hand corner of
the display
Second motor map active
The decimal point after the
third digit in the upper display
will flash.
The symbol ‘Mot2’ will appear
in the lower left hand corner of
the display