User guide
Unidrive SP Short Form Guide 43
Issue Number: 2 www.controltechniques.com
Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting Started
Basic parameters
Running the
motor
SMARTCARD
Advanced
parameters
Diagnostics
UL Listing
Information
5.3 Menu 0
Menu 0 is used to bring together various commonly used parameters for basic easy set
up of the drive.
Appropriate parameters are copied from the advanced menus into menu 0 and thus
exist in both locations.
For further information, refer to Chapter 6 Basic parameters (Menu 0) on page 50.
Figure 5-6 Menu 0 copying
5.4 Menu structure
The drive parameter structure consists of menus and parameters.
The drive initially powers up so that only menu 0 can be viewed. The up and down arrow
buttons are used to navigate between parameters and once level 2 access (L2) has
been enabled (see Pr 0.49) the left and right buttons are used to navigate between
menus. For further information, refer to section 5.11 Parameter access level and
security on page 47.
Figure 5-7 Menu structure
The menus and parameters roll over in both directions.
i.e. if the last parameter is displayed, a further press will cause the display to rollover
and show the first parameter.
When changing between menus the drive remembers which parameter was last viewed
in a particular menu and thus displays that parameter.
Menu 0
0.04
0.05
0.06
Menu 2
2.21
Menu 1
1.14
Menu 4
4.07
5
0
150
0
150
5
Menu 21
Menu 22
Menu 0 Menu 1 Menu 2
Pr
21.00
Pr
22.00
Pr
0.00
Pr
1.00
Pr
2.00
Pr
21.01
Pr
22.01
Pr
0.01
Pr
1.01
Pr
2.01
Pr
21.02
Pr
22.02
Pr
0.02
Pr
1.02
Pr
2.02
Pr
21.29
Pr
22.27
Pr
0.48
Pr
1.49
Pr
2.36
Pr
21.30
Pr
22.28
Pr
0.49
Pr
1.50
Pr
2.37
Pr
21.31
Pr
22.29
Pr
0.50
Pr
1.51
Pr
2.38
Moves
between
parameters
Moves between Menus