User's Guide

30
Front Panel
The front panel on the Home Theater Controller enables
you to see the status or set up the system, including:
` IR Window — Allows you to capture IR codes to
create device drivers for IR-controlled devices using
the Driver Wizard within Composer.
` Data LED (far left LED) — Indicates that data is being
received.
` Link LED (center LED) — Indicates that the Home
Theater Controller’s network address is identified
within a Control4 Project.
` Power LED (far right LED) — Indicates that the
Home Theater Controller is receiving power. This LED
will turn on approximately 30 seconds after the power
is applied to the device.
` Button — Enables the Home Theater Controller to be
identified by its network address on the network. You
can also press the button for 10 seconds to reset the
device.