Setup guide

ManualsBrandsControl4 ManualsConsumer electronicsC4-TSMC7-EN-BL

™

Speciﬁcations

Dimensions (H x

W x D)

7.19” (183 mm) x 5.25” (133 mm) x 2.5”

(63.5 mm)

Weight 1.1 lbs. (.49 kg)

Shipping Weight 1.6 lbs. (.725 kg)

Network 10/100 BaseT Ethernet (preferred) or WiFi

(802.11 b/g/n)

Voltages AC - 100V - 240V

DC - 12 - 24V, 15W

Contacts (2 sets) DC: 48V

maximum operation (low voltage)

Relays (1) AC: 36V, 2A

DC: 24V

maximum operation (low voltage)

Grounding Requirements

The following table indicates which power options

require an earth ground.

Power Type Earth Ground?

AC Yes, required for safety.

Power over Ethernet (PoE) No. Do not connect.

DC Recommended; not required.

Front Panel Description

Figure 1. Front Faceplate

1 Camera. 640 x 480 wide angle. Used for Video

Intercom.

2 Call button. Used to call the person inside the

structure.

3 Speaker. Used for Audio and Video Intercom.

4 Screw holes (2). Used to screw the faceplate into

the exterior wall.

5 Microphones (2). Used for Audio and Video

Intercom.

Supported Models

• C4-DSC-EN-BL Door Station - Exterior

AC, DC, POE & WiFi - Satin Black

• C4-DSC-EN-SN Door Station - Exterior

AC, DC, POE & WiFi - Satin Nickel

• C4-DSC-EN-VB Door Station - Exterior

AC, DC, POE & WiFi - Venetian Bronze

Box Contents

Carefully unpack the Control4® Door Station from the

box and ensure that the following items are included

in the box. Contact your Control4 Dealer immediately

if any parts are missing or if any components are

damaged.

• Control4 Door Station - Exterior faceplate (model

C4-DSC-EN-xx)

• Two (2) mounting screws

• Security screw tool

• Warranty Card

Accessories

• Door Station Metal Back Box (C4-DSBB-M, sold

separately)

• Antenna Kit—WiFi/ZigBee 2.4 GHz, 26cm

(C4-AK-26cm, sold separately)

• Antenna Kit—WiFi/ZigBee 2.4 GHz, 3m

(C4-AK-3M, sold separately)

Door Station - Exterior

Setup Guide

Summary of content (11 pages)

PAGE 1
™ Specifications Door Station - Exterior Setup Guide Dimensions (H x W x D) 7.19” (183 mm) x 5.25” (133 mm) x 2.5” (63.5 mm) Weight 1.1 lbs. (.49 kg) Shipping Weight 1.6 lbs. (.725 kg) Network 10/100 BaseT Ethernet (preferred) or WiFi (802.
PAGE 2
Pre-Installation ™ 1 Find the best exterior location for the Door Station. See “Mounting Tips” below. 2 Door Station - Exterior Setup Guide Install the Door Station Back Box. See the Door Station Back Box Installation Guide for details. 3 Determine which network and power options to use (see “Network Options” and “Power Options”). 4 (WiFi only).
PAGE 3
Mounting Tips Please read the next sections, “Power Options” > “Network and Power Installations” to choose an Follow these tips for the best results. installation option that works best with the system 1 before installing the Door Station. Install the Door Station in a place where it will be protected from water (e.g., rain, sprinklers, etc.). 2 Do not expose the Door Station to direct Power Options sunlight.
PAGE 4
Power and Network Installations To install the Door Station with Ethernet and AC Choose one of these six (6) options to connect the 1 power: (see Figure 4). Door Station’s wiring: • Ethernet with PoE (preferred) 2 Connect a ground wire from the Door Station to one of the back box lugs (see Figure 12). • Ethernet with AC • Ethernet with DC Plug the Ethernet cable into the Door Station 3 Connect a second earth-ground or house-ground • WiFi with AC wire from the second back box lug to the home.
PAGE 5
1 2 Plug the Ethernet cable into the Door Station To install the Door Station with WiFi and AC power: (see Figure 5). 1 3 2 Connect a second earth-ground or house-ground Connect a second earth-ground or house- wire from the second back box lug to the home. ground wire from the second back box lug to the See “Grounding Requirements” for details about home. See “Grounding Requirements” for details earth grounding. 3 about earth grounding. 4 one of the back box lugs (see Figure 6).
PAGE 6
Option 5: WiFi Connection with DC Power Figure 7. WiFi with DC Power Contacts and Relays This option sets up WiFi and DC power. Antenna Ensure that you have WiFi in the home. NOTE: WiFi requires an antenna (sold separately). To install the Door Station with WiFi and DC power: 1 (Recommended) Connect a ground wire from the Door Station to one of the back box lugs (see Figure 12). 2 (Recommended) Connect a second earth-ground or house-ground wire from the second back box lug to the home.
PAGE 7
Reset/Factory Restore the Door Station Figure 8. WiFi with PoE WiFi Antenna To reset or factory restore the Door Station: 1 Unscrew the faceplate (top and bottom) and pull the Door Station out from the back box just enough to expose the Reset button (see Figure 2). 2 While powered press the Reset button on the bottom of the Door Station to reset or restore the Door Station. • Quick press. Press to reset the Door Station. • Long press. Press until the button on the faceplate begins to blink rapidly.
PAGE 8
3 Figure 10. 3m Antenna Kit Thread the other end of the antenna through the back wall of the back box (see Figure 12). Figure 12. Thread Antenna Through Back Box WiFi Antenna Kit Installation (Optional) Before you install the antenna: 1 Make sure the Door Station is assembled. 2 Make sure the Door Station back box is installed in the wall. See the Door Station Back Box Installation Guide for details. 4 Leave the other end of the antenna hanging outside the back box.
PAGE 9
Figure 13. Contacts and Relays Contacts 2 Using a small flat-blade screwdriver, insert the screwdriver into the slot on the small block that Relays sits between the two rows of holes adjacent to the port and push down firmly. The block will depress. 3 Insert the wire. Ensure that the wire inserts all the way into the hole. 4 Release the screwdriver. Example Wiring Connect to a Port Figure 15. Relay Port: Normally Open (e.g.
PAGE 10
It is each Dealer’s sole responsibility to advise their • Routing the Ethernet cable to the Door Station customer at each installation of any security risks through a secure, managed switch to limit data specific to such installation. Control4 makes no access from the Door Station. claims, representations or warranties regarding the security of this product and accepts no liability for Dealers should take time to assure they are not any security risk attendant to a specific installation.
PAGE 11
Important! L’utilisation ou l’installation inexacte peut causer LOSS/DAMAGE DE PROPRIÉTÉ. IMPORTANT! Using this product in a manner other than outlined in this document voids your warranty. Further, Control4 is NOT liable for any damage incurred with the misuse of this product. See “Warranty.” Important! Utilisant ce produit en quelque sorte autre que décrit dans ce document vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dommage encouru avec l’abus de ce produit. Voyez que «Warranty.