Lighting Design Guide
Legal notices Disclaimer Control4® makes no representations or warranties with respect to any Control4 hardware, software, or the contents or use of this publication, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Control4 reserves the right to make changes to any and all parts of Control4 hardware, software, and this publication at any time, without any obligation to notify any person or entity of such changes.
Contents Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A complete control solution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Third-party products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Card Access ZigBee Extender 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Card Access Ceiling-Mount Wireless Motion Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Nyce Control Motion Sensors. . . . . . . . . . . . . .
Introduction 1
Introduction Introduction Control4® lighting solutions represent a breakthrough in automated lighting control, delivering a platform that combines the best in dealer installation opportunities, integration simplicity, system support, and end-user customization. With demand in lighting control and the need for energy efficiency increasing every day, Control4 offers a complete solution that maximizes dealer lighting success.
Best-in-class dealer tools and support Best-in-class dealer tools and support Lighting System Design Service—This service allows dealers to submit a project’s lighting design to Control4, ensuring that it is fully optimized for Control4 Panelized or Wireless Lighting systems.
Wireless Lighting components Wireless Lighting components Motion Sensor Zigbee Extender Outlet Dimmer Switch Outlet Switch Forward Phase Dimmer HC-250/HC-800 0-10V Dimmer Aux Keypad Fan Speed Controller Adaptive Phase Dimmer Keypad Dimmer Contact Switch 4 Configurable Keypad Keyfob
Panelized Lighting components Panelized Lighting components HC-250/HC-800 Router/Switch From Breaker To Load To Override Switch Terminal Block 8-Channel Relay From Breaker To Load To Override Switch Terminal Block 8-Channel Dimmer To 0-10 Fixture To External Relay From Breaker To Override Switch Terminal Block 8-Channel 0-10V Dimmer From Breaker Terminal Block 8-Port Ethernet Switch Bus Ethernet Gateway From Breaker Terminal Block Bus Power Supply 5
Panelized Lighting components 6
System Design & Specification 7
System design types System design types At the beginning of the system design process, you will need to consider a number of factors about the project: • Construction type (new or existing) • Construction materials • Building size and layout • Load types and requirements • Room aesthetics These factors will largely determine the type of Control4 lighting solution you should specify for your client.
System design types Centralized (Panelized Lighting) Recommendations Centralized lighting systems require that all electrical wiring is first routed from the circuit breaker to a centrally located Control4 panel (or panels) that contains load control modules. These panels are typically located in an equipment closet or utility room. Electrical connections from the centralized load modules are wired directly to each light or load.
System design types Distributed (Panelized Lighting) Recommendations A distributed lighting design is nearly identical to a centralized design, but includes two or more Control4 panel locations throughout the home. In this design, electrical wiring is routed from the breaker box to designated panel locations, and then to the loads.
System design types Hybrid (Wireless and Panelized Lighting) Recommendations A hybrid lighting design combines a centralized or distributed Panelized Lighting design with localized Control4 wireless switches and dimmers. This design gives the flexibility to place elegant wired keypads or touch screens in prominent areas, such as living rooms, dining rooms, kitchens and foyers, while providing familiar toggle switches and dimmers in areas such as guest rooms and closets.
Specifying a system Specifying a system Electrical floor plan During initial meetings with the project’s key decision makers and influencers (Control4 dealer, client, architect, interior designer, and lighting designer), key elements of design should be agreed upon by all parties. Following are three elements needed to correctly specify a Control4 lighting system—the electrical floor plan, the electrical panel schedule, the light fixture schedule, and the fixture datasheets.
Specifying a system Electrical panel schedule Light fixture schedule Details from the electrical floor plan are used by the electrical engineer to create the panel schedule(s). This important source of information provides details regarding every electrical load and how it is connected to a panel board circuit.
Specifying a system Fixture datasheets Generally, the load schedule will reference the datasheets for the lighting fixtures being specified. Key information is provided in these datasheets, such as: • • • Voltage (line-voltage or low-voltage) Required dimming control technology Transformer or LED driver specifics • A fixture datasheet will often list multiple transformer or driver options. In this case, it’s critical to determine which of the options is actually being used.
Specifying a system Example reports Load Schedule report Panel report Module report 15
Specifying a system 16
Wireless Lighting Specifications 17
Control4 Wireless Adaptive Phase Dimmer Control4 Wireless Adaptive Phase Dimmer 120V (C4-APD120), 240V (C4-APD240), 277V (C4-APD277) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) • • The Control4® W
Control4 Wireless Adaptive Phase Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Adaptive Phase Dimmer Specifications Model Numbers C4-APD120, C4-APD240, C4-APD277 C4-APD120: 120VAC +/-10%, 50/60 Hz C4-APD240: 220VAC-240VAC +/-10%, 50/60 Hz C4-APD277: 277VAC +/-10%, 50/60 Hz Power Requirements Power Consumption *NOTES: 1) The maximum load requirements for fluorescent, CFL and LED loads can vary greatly depending upon the specific fixture and/or bulb being used. 2) The quality and performance of these load types varies greatly from manufacturer to manufacturer.
Control4 Wireless Keypad Dimmer Control4 Wireless Keypad Dimmer 120V (C4-KD120), 240V (C4-KD240), 277V (C4-KD277) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) • • • The Control4® Wireless Keypad D
Control4 Wireless Keypad Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Keypad Dimmer Specifications Model Numbers C4-KD120, C4-KD240, C4-KD277 Power Requirements C4-KD120: 120VAC +/-10%, 50/60 Hz C4-KD240: 220VAC +/-10%, 50/60 Hz C4-KD277: 277VAC +/-10%, 50/60 Hz This device can function with or without a neutral AC connection depending on load type. C4-KD120: 450mW C4-KD240: 2.
Control4 Forward Phase Dimmer Control4 Forward Phase Dimmer 120V (C4-FPD120) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) The Control4® Wireless Forward Phase Dimmer provides an economical solution
Control4 Forward Phase Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Forward Phase Dimmer Specifications Model Numbers C4-FPD120 Power Requirements 120VAC +/-10%, 50/60 Hz This device can function with or without a neutral AC connection depending on load type. Power Consumption 450mW Supported Load Types Incandescent; Halogen; Magnetic (Iron Core, Inductive) Low Voltage (MLV) Transformers; Forward Phase Dimmable Fluorescents, Compact Fluorescents, and LEDs.
Control4 Wireless Switch Control4 Wireless Switch 120V/277V (C4-SW120277), 240V (C4-SW240) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) Included The Control4® Wireless Switch provides on/off contr
Control4 Wireless Switch Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Switch Specifications Model Number C4-SW120277 and C4-SW240 Power Requirements C4-SW120277: 110-277VAC +/-10%, 50/60 Hz C4-SW240: 220VAC-240VAC +/-10%, 50/60 Hz This device requires a neutral connection.
Control4 Wireless Configurable Keypad Control4 Wireless Configurable Keypad 120V/277V (C4-KC120277), 240V (C4-KC240) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) Included The Control4® Wireless Co
Control4 Wireless Configurable Keypad Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Configurable Keypad Specifications Model Number C4-KC120277 and C4-KC240 Power Requirements C4-KC120277: 110-277VAC +/-10%, 50/60 Hz or 36VDC-48VDC C4-KC240: 220VAC-240VAC +/-10%, 50/60 Hz or 36VDC-48VDC This device requires a neutral AC connection.
Control4 Wireless Fan Speed Controller Control4 Wireless Fan Speed Controller 120V (C4-4SF120) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) Installation notes The Control4® Wireless Fan Speed Contr
Control4 Wireless Fan Speed Controller Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Fan Speed Controller Specifications Model Number C4-4SF120 Power Requirements 120VAC +/-10%, 50/60 Hz This device requires a neutral connection. Power Consumption 500mW Load Types and Ratings Supported Load Types Single, paddle-type ceiling fan Maximum Load 2A Environmental Operational Temperature 32˚F ~ 104˚F (0˚C ~ 40˚C) Humidity 5% to 95% non-condensing Storage -4˚F ~ 158˚F (-20˚C ~ 70˚C) Miscellaneous Control Communications ZigBee, IEEE 802.15.4, 2.
Control4 Wireless 0-10V Dimmer Control4 Wireless 0-10V Dimmer 120V/277V (C4-TV120277), 240V (C4-TV240) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) Included The Control4® Wireless 0-10V Dimmer pro
Control4 Wireless 0-10V Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless 0-10V Dimmer Specifications Model Number C4-TV120277 and C4-TV240 Power Requirements C4-TV120277: 110-277VAC +/-10%, 50/60 Hz C4-TV240: 220VAC-240VAC +/-10%, 50/60 Hz This device requires a neutral AC connection. Power Consumption 120V: 485mW 240V: 1.0W 277V: 1.18W Load Types and Ratings Supported Load Types Four-wire 0-10V and 1-10V dimmable fluorescent ballasts and LEDs, sink or source.
Control4 Auxiliary Keypad Control4 Auxiliary Keypad Remember faceplates! (Not included) 120V/277V (C4-KA) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) The Control4® Auxiliary Keypad provides an economical solution for 3-way control
Control4 Auxiliary Keypad Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Auxiliary Keypad Specifications Model Number C4-KA Power Requirements 110-277VAC +/-10% 50/60 Hz Environmental Operational Temperature 32˚F ~ 104˚F (0˚C ~ 40˚C) Humidity 5% to 95% non-condensing Storage -4˚F ~ 158˚F (-20˚C ~ 70˚C) Miscellaneous Wall Box Volume 4.75 cubic inches Weight 0.07 lb. (0.03 kg) Shipping Weight 0.12 lb. (0.
Control4 Wireless Outlet Dimmer and Switch Control4 Wireless Outlet Dimmer and Switch Outlet Dimmer (LOZ-5D1), Outlet Switch (LOZ-5S1) Wireless Outlet Dimmer Dimmable Devices Only 1 2 The Control4® Outlet Dimmers and Switches provide the benefits of smart lighting with easy-to-use affordability. These dimmers and switches easily plug into power outlets to offer complete control of plug-in lights and other devices.
Control4 Wireless Outlet Dimmer and Switch Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Wireless Outlet Dimmer and Switch Specifications Control4® Wireless Outlet Dimmer Control4® Wireless Outlet Switch Model Number LOZ-5D1 LOZ-5S1 Power Requirements 120VAC +/- 10% 60/50 Hz 120VAC +/- 10% 60/50 Hz Power Consumption 1.4W ~ LEDs Off 1.4W ~ LEDs Off Supports No-Neutral Wiring Option No No Minimum Load 25 W N/A Incandescent/Tungsten/Halogen 700W Total Across Both Outlets 600W Each Outlet Fluorescent N/A 5.
Third-party products Third-party products Note: Availability of third-party devices is subject to change at any time. Nyce Control Motion Sensors NCZ-3041, NCZ-3043 Card Access ZigBee Extender 3 ZCA-ZXT30 These sensor solutions combine the features of a motion sensor and ZigBee radio into a single small device. Packed with intelligent features, the wireless motion sensor expands Control4’s network possibilities, reporting motion anywhere in the home, allowing the lighting system to respond accordingly.
Third-party products 46
Panelized Lighting Specifications 47
Control4 5-Slot and 2-Slot Panels Control4 5-Slot and 2-Slot Panels 5-Slot Panel (C4-DIN-5PAN), 2-Slot Panel (C4-DIN-2PAN) Included The Control4® 5-Slot and 2-Slot Panels house all centralized components of a Control4® Panelized Lighting system. Both panels include a variety of creative features designed to make installation and wiring of the system quick and convenient. • • • Product features • • • • • • • Surface mount or flush mount between a standard 16-inch-oncenter stud bay.
Control4 5-Slot and 2-Slot Panels Need CAD files for your lighting projects? Go to dealer.control4.
Control4 5-Slot and 2-Slot Panels Need CAD files for your lighting projects? Go to dealer.control4.
Control4 8-Channel 0-10V Dimmer Control4 8-Channel 0-10V Dimmer (C4-DIN-8TV-E) The Control4® 8-Channel 0-10V Dimmer controls up to eight 0-10V dimmable fluorescent ballasts or LEDs. Each channel can control up to 50 ballasts. Individual 0-10V lights can be programmatically tied to a corresponding channel on an 8-Channel Relay module for on/off control of the ballast or LED when needed.
Control4 8-Channel 0-10V Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 8-Channel 0-10V Dimmer Specifications Model Number C4-DIN-8TV-E Power Requirements 100-277VAC, 50/60 Hz 0-10V Per Channel Max 100mA sink (approximately 50 ballasts—see ballast specifications) 25mA source (approximately 12 ballasts—see ballast specifications) External Relay Channel Rating 24V max, 50mA max Power Consumption 2.5W Supported Load Types 0-10V and 1-10V dimmable fluorescent ballasts and LEDs, sink or source.
Control4 8-Channel Dimmer Control4 8-Channel Dimmer (C4-DIN-8DIM-E) The Control4® 8-Channel Dimmer controls up to eight loads from one module in the Control4 system. With adaptive phase dimming technology, the 8-Channel Dimmer automatically detects the load type on each channel and sets the appropriate dimming mode for each load. Product features • • • • • • • • • • • 110V to 277V operation. IP controlled.
Control4 8-Channel Dimmer Need CAD files for your lighting projects? Go to dealer.control4.
Control4 8-Channel Dimmer Specifications Model Number C4-DIN-8DIM-E Power Requirements 100-277VAC, 50/60 Hz Line Feeds (Circuits) 1 or 2 Power Consumption 4W Supported Load Types Incandescent, Halogen, Electronic Low Voltage Transformers (ELV), Magnetic (Iron Core) Low Voltage Transformers (MLV), Fluorescents, Compact Fluorescents, LEDs, Motors Control Communcations Ethernet Module Load Ratings in Contro4® Panel 120V 240V 277V Module Max with Two Line-Ins 3200W 6000W 6000W Line-In 1 Max 1
Control4 8-Channel Relay Control4 8-Channel Relay (C4-DIN-8REL-E) The Control4® 8-Channel Relay controls up to eight high in-rush loads from one module in the Contro4 system. Each channel supports a variety of load types including Incandescent, Halogen, Electronic Low Voltage Transformers, Magnetic Low Voltage Transformers, Fluorescents, Compact Fluorescents, LEDs, and motors. Product features • • • • • • • • • • 110V to 277V operation. IP controlled. Controls up to eight high in-rush loads.
Control4 8-Channel Relay Need CAD files for your lighting projects? Go to dealer.control4.
Control4 8-Channel Relay Specifications Model Number C4-DIN-8REL-E Power Requirements 100-277VAC, 50/60 Hz Line Feeds (Circuits) 4 Power Consumption 3W Supported Load Types Incandescent, Halogen, Electronic Low Voltage Transformers (ELV), Magnetic Low Voltage Transformers (MLV), Fluorescents, Compact Fluorescents, LEDs, Motors Control Communcations Ethernet Module Load Ratings in Contro4 Panel 120V 240V 277V Module Max 64A 64A 64A Line-In 1 Max 16A 16A 16A Line-in 2 Max 16A 16A 16A
Control4 8-Port Ethernet Switch Control4 8-Port Ethernet Switch (C4-DIN-8ESW-E) The Control4® 8-Port Ethernet Switch is a standard 8-port 10/100 switch that allows a single Ethernet CAT5e cable to be pulled into a lighting panel, and then distributed to up to seven other Control4 Panelized Lighting devices including Dimmer, Relay, and Bus Ethernet Bridge Modules within the panel. Product features • • • • • 110V to 277V operation. Link/Activity LEDs indicate system link status and communication activity.
Control4 8-Port Ethernet Switch Need CAD files for your lighting projects? Go to dealer.control4.
Control4 8-Port Ethernet Switch Specifications Model Number C4-DIN-8ESW-E Power Requirements 110V-277VAC, 50/60 Hz Operating Temperature 32˚F ~ 104˚F (0˚C ~ 40˚C) Power Consumption 2W Communications 10/100 Ethernet Connectors Three Screw Terminals (Line, Neutral, Ground) One 26 AWG to 12 AWG (0.12 mm ~ 4 mm2) per terminal Eight RJ-45 Ethernet Humidity 5% - 95% Non-condensing Storage -4˚F ~ 158˚F (-20˚C ~ 70˚C) Dimensions (H×W×D) 8.5" × 4.3" × 2.
Control4 Bus Ethernet Gateway Control4 Bus Ethernet Gateway (C4-DIN-BEG) The Control4® Bus Ethernet Gateway is the connection point for all wired keypads and other devices on the Control4 Panelized Lighting RS-485 bus. Product features • • • • 110V to 277V operation. IP controlled. Converts RS-485 communication to Ethernet. Connection point for wired keypads and other devices on the RS-485 bus. • Compatible with the 48V bus power supply. • Communicates with up to 80 Wired Keypads.
Control4 Bus Ethernet Gateway Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Bus Ethernet Gateway Specifications Model Number C4-DIN-BEG Power Input 48VDC Power Consumption 1.5mW Control Communications 10/100 Ethernet Environmental Operational Temperature 32˚F ~ 104˚F (0˚C ~ 40˚C) Humidity 5% to 95% non-condensing Storage -4˚F ~ 158˚F (-20˚C ~ 70˚C) Connectors Ethernet (1) RS-485 Pluggable Terminal Blocks (2) RJ-45 36 AWG to 14 AWG (0.14 mm2 to 1.5 mm2) Dimensions Dimensions (H × W × D) 4.23" × 4.48" × 2.32" (107.5 mm × 113.
Control4 Bus Power Supply (48V) Control4 Bus Power Supply (48V) (C4-DIN-BPS48) The Control4 48V Bus Power Supply provides power for the Configurable Wired Keypads (C4-KCB and C4-SKCB), the Bus Ethernet Gateway (C4-DIN-BEG), and the Dry Contact Input Module (C4-DCIM). It can also be used to power the Configurable Wired Keypads (C4-KC120/277 and C4-KC240) in a mixed wired/ wireless keypad installation.
Control4 Bus Power Supply (48V) FRONT TOP 4.48 in (113 mm) 2.26 in (57 mm) 4.23 in (107 mm) 4.23 in (107 mm) BACK SIDE 2.26 in (57 mm) Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Bus Power Supply (48V) Specifications Model Number C4-DIN-BPS48 Power Input 100-277VAC/1.25A Power Consumption 75W, 120V/1.0A; 240V/0.6A; 277V/0.52A Connectors One RS-485 Pluggable Terminal Block One Line Voltage Screw Terminal (Line, Neutral, Ground) 36AWG to 14AWG (0.14 to 1.5 mm2) per terminal One 26AWG to 12AWG (0.
Control4 Decora Wired Keypad Control4 Decora Wired Keypad (C4-KCB) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) Included The Control4® Decora® Wired Keypad combines beautiful aesthetics and flexibl
Control4 Decora Wired Keypad Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Decora Wired Keypad Specifications Model Number C4-KCB Programmable Buttons 2-7, depending on configuration Button LED Feedback One RGB status LED per button Power Requirements 48VDC Maximum Power Consumption 1.2W Minimum Power Consumption 0.7W Recommended Wiring See "Keypad Bus Wiring Recommendations" document Miscellaneous Control Communications RS-485 Weight 0.1 lb (0.045 kg) Shipping Weight 0.3 lb (0.
Control4 Square Wired Keypad Control4 Square Wired Keypad (C4-SKCB) Remember faceplates! (Not included) 1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx), 3-Gang (C4-FP3-xx), 4-Gang (C4-FP4xx), 1-Gang Square (C4-SFP1-xx) Gloss: White (WH), Light Almond (LA), Ivory (IV), Brown (BN), Black (BL) Satin: Snow White (SW), Midnight Black (MB), Biscuit (BI), Aluminum (AU) Metal: Satin Nickel (SN), Stainless Steel (SS), Venetian Bronze (VB) The Control4® Square Wired Keypad combines beautiful aesthetics and flexible button
Control4 Square Wired Keypad Need CAD files for your lighting projects? Go to dealer.control4.
Control4 Square Wired Keypad Specifications Model Number C4-SKCB Programmable Buttons 2-7 depending on configuration Button LED Feedback One RGB status LED per button Power Requirements 48VDC Maximum Power Consumption 1.2W Minimum Power Consumption 0.7W Recommended Wiring See "Keypad Bus Wiring Recommendations" document Miscellaneous Control Communications RS-485 Weight 0.1 lb (0.045 kg) Shipping Weight 0.3 lb (0.
Control4 Terminal Blocks Control4 Terminal Blocks 8-Channel Dimmer Terminal Block (C4-DIN-TB-8DIM) 8-Channel Relay Terminal Block (C4-DIN-TB-8REL) Power/Override Terminal Block (C4-DIN-TB-PO) Control4® Terminal Blocks mount in a Control4 Panelized Lighting Panel (C4- DIN-5PAN or C4-DIN-2PAN) and are used to terminate field wiring (Line, Neutral, and Load) for each circuit in a Panelized Lighting system. Terminal Blocks provide the appropriate connections for each module type.
Control4 4-Channel Bus Dry Contact Input Module Control4 4-Channel Bus Dry Contact Input Module (C4-DCIM4) COM D- GND V+ D+ 4 COM 3 COM 2 COM DRY CONTACT INPUT MODULE MODEL: C4-DCIM4 48 VDC 1 GND OUT 12V N1743 Z703 Made in China 130-00261 The 4-Channel Bus Dry Contact Input Module allows up to four toggle switches or other dry contact closures to trigger lights, scenes, or any other automation event in a Control4 system.
Control4 4-Channel Bus Dry Contact Input Module FRONT TOP 1.89 in (48 mm) 1.89 in (48 mm) BACK SIDE COM D- GND D+ V+ 4 COM 3 COM 0.
Control4 4-Channel Bus Dry Contact Input Module Specifications Model Number C4-DCIM4 4-Channel Bus Dry Contact Input Module Power Requirements 48VDC Power output 12VDC, 50mA Power consumption 0.15mW Environmental Operational Temperature 0˚C ~ 40˚C (32˚F ~ 104˚F) Humidity 5% to 95% non-condensing Storage -4˚F ~ 158˚F (-20˚C ~ 70˚C) Miscellaneous Control communications RS-485 Weight 0.05 lb. (0.022 kg) Shipping Weight 0.13 lb. (0.06 kg) Dimensions 1.9” × 1.9” × 0.4” (48.3 mm × 48.
Appendix Lighting project checklist The checklist on the following pages is intended to be a guide for progressing through the stages of a Control4 lighting project. It’s important to note that not every checklist item or list of suggested attendees will be applicable for every project, as each installation is unique. However, this checklist helps ensure that no important steps are missed along the way, assisting in overall project success.
3 Project Approval 4 Team determines preliminary list of lighting scenes per room/floor Input Criteria: Feedback from C4 on load characterization Cost estimate including C4 gear, C4 dealer labor and electrician costs Key Deliverables: Parties have an on what needs to be done and that all costs are covered between the team members Revise the C4 lighting cost estimate in a detailed quotation Checklists completed for each activity above C4 dealer presents client with keypad engraving repor
7 System Program 8 Review 9 Client Walk-thru Client Walk-thru Device Install Review with Team 6 Programming Final implementation: Rough-In Device Install Implementation review: 5 Project Rough-In System programming: Review use of keypads and recommend keycap assignment (custom engraving for each keypad) Review luminary and bulb selection and lighting scenes in each room 81 Customer change orders Variances between initial estimate Prompt, detailed of all costs Accounting for:
Wireless Lighting application Wireless Lighting Living Room FAN SPEED CONTROLLER Kitchen TRAN SWITCH CONFIGURABLE KEYPAD CEILING FAN LED BULB ADAPTIVE PHASE DIMMER ADAPTIVE PHASE DIMMER PANTRY FORWARD PHASE DIMMER LED BULB AUXILIARY KEYPAD LED BULB CHANDELIER Home Theater ELECTRICAL BREAKER BOX ADAPTIVE PHASE DIMMER ADAPTIVE PHASE DIMMER WALL SCONCES HALOGEN BULB 0-10V DIMMER 0-10V LED FIXTURE 82 KEYPAD DIMMER HALOGEN BULB
Wireless Lighting application application Master Bedroom NSFORMER TABLE LAMP KEYPAD DIMMER KEYPAD DIMMER OUTLET DIMMER HALOGEN BULB PENDANT LIGHTS ADAPTIVE PHASE DIMMER FAN SPEED CONTROLLER LED LIGHTS LED BULB CEILING FAN 0-10V DIMMER 0-10V LED DRIVER AUXILIARY KEYPAD Guest Bedroom FORWARD PHASE DIMMER TABLE LAMP HC-800 STANDARD (INCANDESCENT) BULB LINE VOLTAGE FROM BREAKER BOX CENTRAL CONTROLLER/ AV RACK 83 OUTLET SWITCH 0-10V CONTROL ZIGBEE RF
Panelized Lighting application Panelized Lighting Living Room Kitchen LED BULB LED BULBS LED BULBS PANTRY FAN SPEED CONTROLLER CEILING FAN WIRED KEYPAD CHANDEL ELECTRICAL BREAKER BOX HALOGEN BULBS WALL SCONCES WIRED KEYPAD 0-10V LED DRIVER 0-10V LED FIXTURE Home Theater 84 Mechanical Room
Panelized Lighting application application Master Bedroom WIRED KEYPAD WIRED KEYPAD HALOGEN BULBS 0-10V LED FIXTURE LED BULBS HALOGEN BULBS WIRELESS KEYPAD LIER PANELIZED LIGHTING ENCLOSURE ROUTER FORWARD PHASE DIMMER CAT-5 HC-800 ETHERNET SWITCH TABLE LAMP OUTLET SWITCH HALOGEN BULBS Guest Bedroom CENTRAL CONTROLLER/ AV RACK LINE VOLTAGE FROM BREAKER BOX Closet 85 LINE VOLTAGE FROM PANELIZED ENCLOSURE KEYPAD BUS 0-10V CONTROL ZIGBEE RF
Control4 Corporation 11734 S. Election Road, Suite 200 Salt Lake City, UT 84020 USA http://www.control4.
