Lighting Design Guide
Table Of Contents
- Legal notices
- Introduction
- A complete control solution
- Comprehensive control options
- Enhanced user interface customization
- Integration simplicity
- Best-in-class dealer tools and support
- Wireless Lighting components
- Panelized Lighting components
- System design types
- Specifying a system
- Control4 Wireless Adaptive Phase Dimmer
- Control4 Wireless Keypad Dimmer
- Control4 Forward Phase Dimmer
- Control4 Wireless Switch
- Control4 Wireless Configurable Keypad
- Control4 Wireless Fan Speed Controller
- Control4 Wireless 0-10V Dimmer
- Control4 Auxiliary Keypad
- Control4 Wireless Outlet Dimmer and Switch
- Third-party products
- Control4 5-Slot and 2-Slot Panels
- Control4 8-Channel 0-10V Dimmer
- Control4 8-Channel Dimmer
- Control4 8-Channel Relay
- Control4 8-Port Ethernet Switch
- Control4 Bus Ethernet Gateway
- Control4 Bus Power Supply (48V)
- Control4 Decora Wired Keypad
- Control4 Square Wired Keypad
- Control4 Terminal Blocks
- Control4 4-Channel Bus Dry Contact Input Module
- Lighting project checklist
- Wireless Lighting application
- Panelized Lighting application
27
Control4 Wireless Switch
Control4 Wireless Switch
120V/277V (C4-SW120277), 240V (C4-SW240)
The Control4® Wireless Switch provides on/o control for a
variety of load types, including:
• Incandescents
• Halogens
• Electronic low-voltage (solid state) transformers
• Magnetic (iron core) low-voltage transformers
• Fluorescents
• Compact fluorescents
• LEDs
• Motors
Product features
• Provides on/o control of non-dimmable loads.
• With its durable relay and high amperage rating, it can handle
high in-rush loads such as fountain pumps, large banks of
fluorescent lights, and wall outlets.
• Available in a wide array of gloss and satin colors (see
Available Colors in the specifications table).
• Custom engraving available to clearly identify which load each
switch controls.
• Backlit engraving provides easy readability regardless of light
level or time of day.
• Status and backlight LED colors can be set to reflect a device
or scene status or simply to complement the room’s décor.
• Ambient light sensor automatically adjusts backlight and
status LED brightness, depending on the light level in the
room.
• Can be repurposed in Composer to act as a 2-button keypad
with no direct load control.
• Continuously monitors energy consumption of the connected
load.
• Air gap actuator on the top of the switch disconnects power
to the device.
Included
• Switch
• Wire nuts (120V/277V) or Terminal Block (240V)
• Switch Installation Guide
Installation notes
• Follow all instructions in the installation guide.
• This device must be installed by a licensed electrician.
• Installs in a standard NEMA wall box using typical wiring
standards.
• When used in conjunction with an Auxiliary Keypad
(C4-KA-xx), the wire connecting the Auxiliary Keypad to this
device must not exceed 150 feet (45 meters) at 120VAC and
100 feet (30 meters) at 277VAC.
• Requires a neutral connection and an earth ground
connection.
• Full load control is available from the device before being
identified into a project.
• Grounding is highly recommended for this product. Grounding
will protect the device from ESD (electrostatic discharge)
eects. Follow the wiring diagrams in the installation guide.
• WARNING! This device must be protected by a circuit breaker
(20A max).
For full installation instructions and warnings, see the Switch
Installation Guide. See Control4 training materials for best
practices on ZigBee installation.
Remember faceplates! (Not included)
Gloss: White (WH), Light Almond(LA),
Ivory(IV), Brown(BN), Black(BL)
Satin: Snow White (SW), Midnight
Black(MB), Biscuit(BI), Aluminum(AU)
Metal: Satin Nickel (SN), Stainless
Steel(SS), Venetian Bronze(VB)
1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx),
3-Gang (C4-FP3-xx), 4-Gang (C4-FP4-
xx), 1-Gang Square (C4-SFP1-xx)