Lighting Design Guide
Table Of Contents
- Legal notices
- Introduction
- A complete control solution
- Comprehensive control options
- Enhanced user interface customization
- Integration simplicity
- Best-in-class dealer tools and support
- Wireless Lighting components
- Panelized Lighting components
- System design types
- Specifying a system
- Control4 Wireless Adaptive Phase Dimmer
- Control4 Wireless Keypad Dimmer
- Control4 Forward Phase Dimmer
- Control4 Wireless Switch
- Control4 Wireless Configurable Keypad
- Control4 Wireless Fan Speed Controller
- Control4 Wireless 0-10V Dimmer
- Control4 Auxiliary Keypad
- Control4 Wireless Outlet Dimmer and Switch
- Third-party products
- Control4 5-Slot and 2-Slot Panels
- Control4 8-Channel 0-10V Dimmer
- Control4 8-Channel Dimmer
- Control4 8-Channel Relay
- Control4 8-Port Ethernet Switch
- Control4 Bus Ethernet Gateway
- Control4 Bus Power Supply (48V)
- Control4 Decora Wired Keypad
- Control4 Square Wired Keypad
- Control4 Terminal Blocks
- Control4 4-Channel Bus Dry Contact Input Module
- Lighting project checklist
- Wireless Lighting application
- Panelized Lighting application
39
Control4 Auxiliary Keypad
Control4 Auxiliary Keypad
120V/277V (C4-KA)
The Control4® Auxiliary Keypad provides an economical solution
for 3-way control of a load. If a retrofit, it uses the existing, in-wall
3-way wiring.
Product features
• Wires directly to any compatible Control4 load control device
(dimmer, Switch, or Fan Speed Controller) and provides full
control of the load attached to the associated device.
• Does not require any connection to a Control4 controller in
order to provide load control. This ensures that 3-way control
works prior to configuration of the project as well as any time
that the control system is oine.
• Use up to ten Auxiliary Keypads connected to a single load
control device.
• Available in a wide array of gloss and satin colors (see
Available Colors in the specifications table).
• Can be repurposed in Composer to act as a 2-button keypad
with no direct load control.
• Custom engraving is available to clearly identify each device.
Backlit engraving available with programmable color control
for easy readability regardless of time of day or light level.
Included
• Auxiliary Keypad
• Wire nuts
• Auxiliary Keypad Installation Guide
Installation notes
• Follow all instructions in the installation guide.
• This device must be installed by a licensed electrician.
• Installs in a standard NEMA wall box using typical wiring
standards.
• The wire connecting the Auxiliary Keypad to the load control
device must not exceed 150 feet (45 meters) at 120VAC and
100 feet (30 meters) at 277VAC.
• Requires an earth ground connection.
• Full load control is available from the device before being
identified into a project.
• Can be powered via line-voltage or low-voltage using either
the Control4 36V Keypad Power Supply or the Control4 48V
Bus Power Supply.
• To prevent changes and delays in your custom engraving
order, plan and order any custom button engraving only after
the installation plan is finalized.
• Grounding is highly recommended for this product. Grounding
will protect the device from ESD (electrostatic discharge)
eects. Follow the wiring diagrams in the installation guide.
For full installation instructions and warnings, see the Auxiliary
Keypad Installation Guide. See Control4 training materials for
best practices on ZigBee installation.
Remember faceplates! (Not included)
Gloss: White (WH), Light Almond(LA),
Ivory(IV), Brown(BN), Black(BL)
Satin: Snow White (SW), Midnight
Black(MB), Biscuit(BI), Aluminum(AU)
Metal: Satin Nickel (SN), Stainless
Steel(SS), Venetian Bronze(VB)
1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx),
3-Gang (C4-FP3-xx), 4-Gang (C4-FP4-
xx), 1-Gang Square (C4-SFP1-xx)