Lighting Design Guide

Table Of Contents
45
Third-party products
Third-party products
Note: Availability of third-party devices is subject to change at
any time.
Card Access ZigBee Extender 3
ZCA-ZXT30
The Card Access ZigBee Extender 3 is designed to extend and
bolster your ZigBee mesh. Extenders help eliminate network
“blind spots,” and they are critical for a healthy mesh in a home
using a Centralized Lighting approach.
Card Access Ceiling-Mount Wireless Motion Sensors
ZCA-WMS10-C-ZP
ZCA-WMS10-2EXT-ZP
ZCA-WMS10-CL-ZP
ZCA-WMS10-2-ZP
Choose from a variety of sensors to add even more intelligent
home automation that can trigger and control events throughout
the home. Using these motion detectors, events can be triggered
based on object motion, occupancy, and room ambient lighting
levels. Automatically control room lighting, pathway lighting, and
exterior lighting, either inside or outside the home.
Nyce Control Motion Sensors
NCZ-3041, NCZ-3043
These sensor solutions combine the features of a motion
sensor and ZigBee radio into a single small device. Packed
with intelligent features, the wireless motion sensor expands
Control4’s network possibilities, reporting motion anywhere in
the home, allowing the lighting system to respond accordingly.
And all without any wires.
Card Access Wireless Contact Relays
ZCA-WCS10-R-EXT-ZP, ZCA-WCS10-R-ZP
Extends the range of the ZigBee mesh with built-in ZigBee
extender capabilities. Includes an on-board magnetic contact
sensor that wirelessly integrates into the Control4 system.
You can use any standard magnetic contact or order one
directly from Card Access. A built-in thermometer adds remote
temperature-sensing capabilities to the Control4 home, giving
homeowners added automation features and capabilities based
on indoor or outdoor temperature events. Internal and external
antenna models are available.
Card Access Wireless Contact Sensors
ZCA-WCS10B-2-ZP, ZCA-WCS10A-2-ZP
Includes an integrated reed switch (for use with your favorite
contact magnet) and one temperature sensor. LED indicators
confirm alignment of your contact magnet, proper mesh network
operation, and connectivity, and proper operation of externally
connected contact switches. Internal and external antenna
models are available.