Lighting Design Guide
Table Of Contents
- Legal notices
- Introduction
- A complete control solution
- Comprehensive control options
- Enhanced user interface customization
- Integration simplicity
- Best-in-class dealer tools and support
- Wireless Lighting components
- Panelized Lighting components
- System design types
- Specifying a system
- Control4 Wireless Adaptive Phase Dimmer
- Control4 Wireless Keypad Dimmer
- Control4 Forward Phase Dimmer
- Control4 Wireless Switch
- Control4 Wireless Configurable Keypad
- Control4 Wireless Fan Speed Controller
- Control4 Wireless 0-10V Dimmer
- Control4 Auxiliary Keypad
- Control4 Wireless Outlet Dimmer and Switch
- Third-party products
- Control4 5-Slot and 2-Slot Panels
- Control4 8-Channel 0-10V Dimmer
- Control4 8-Channel Dimmer
- Control4 8-Channel Relay
- Control4 8-Port Ethernet Switch
- Control4 Bus Ethernet Gateway
- Control4 Bus Power Supply (48V)
- Control4 Decora Wired Keypad
- Control4 Square Wired Keypad
- Control4 Terminal Blocks
- Control4 4-Channel Bus Dry Contact Input Module
- Lighting project checklist
- Wireless Lighting application
- Panelized Lighting application
66
Control4 Bus Power Supply (48V)
Control4 Bus Power Supply (48V)
(C4-DIN-BPS48)
The Control4 48V Bus Power Supply provides power for the
Configurable Wired Keypads (C4-KCB and C4-SKCB), the Bus
Ethernet Gateway (C4-DIN-BEG), and the Dry Contact Input
Module (C4-DCIM). It can also be used to power the Configurable
Wired Keypads (C4-KC120/277 and C4-KC240) in a mixed wired/
wireless keypad installation. This product is used in conjunction
with the Control4 Bus Ethernet Gateway to allow keypads on the
RS-485 bus to communicate with a Control4 controller and the
Panelized Lighting system.
Product features
• 110V to 277V Line input for power.
• LED for power status.
• Mounts in the Control4 5- or 2-Slot Panel, or in any standard
DIN rail panel with 35 mm rails.
• Occupies 1/2 slot in a Control4 panel.
• See the Keypad Bus Wiring Guide for details on maximum
number of keypads per power supply.
Included
• Bus Power Supply, 48V
• One Pluggable Terminal Block
• Bus Power Supply, 48V Installation Guide
Installation notes
• Installs in any standard DIN rail panel.
• Should be installed in a climate-controlled area.
For full installation instructions and warnings, see the Bus Power
Supply, 48V Installation Guide. For bus wiring details, refer to the
Keypad Bus Wiring Guide.