Lighting Design Guide
Table Of Contents
- Legal notices
- Introduction
- A complete control solution
- Comprehensive control options
- Enhanced user interface customization
- Integration simplicity
- Best-in-class dealer tools and support
- Wireless Lighting components
- Panelized Lighting components
- System design types
- Specifying a system
- Control4 Wireless Adaptive Phase Dimmer
- Control4 Wireless Keypad Dimmer
- Control4 Forward Phase Dimmer
- Control4 Wireless Switch
- Control4 Wireless Configurable Keypad
- Control4 Wireless Fan Speed Controller
- Control4 Wireless 0-10V Dimmer
- Control4 Auxiliary Keypad
- Control4 Wireless Outlet Dimmer and Switch
- Third-party products
- Control4 5-Slot and 2-Slot Panels
- Control4 8-Channel 0-10V Dimmer
- Control4 8-Channel Dimmer
- Control4 8-Channel Relay
- Control4 8-Port Ethernet Switch
- Control4 Bus Ethernet Gateway
- Control4 Bus Power Supply (48V)
- Control4 Decora Wired Keypad
- Control4 Square Wired Keypad
- Control4 Terminal Blocks
- Control4 4-Channel Bus Dry Contact Input Module
- Lighting project checklist
- Wireless Lighting application
- Panelized Lighting application
69
Control4 Decora Wired Keypad
Control4 Decora Wired Keypad
(C4-KCB)
The Control4® Decora® Wired Keypad combines beautiful
aesthetics and flexible button configuration, providing a stunning
user interface that elegantly controls any aspect of a Control4
system. Control lights, scene, music, security—the possibilities
are endless. The keypad can be configured with two to seven
buttons using four dierent button sizes for a total of 37 possible
configurations. There’s no need to worry about how many
buttons will be needed on a specific keypad prior to (or even
after) installation.
Product features
• Uses RS-485-based bus communications.
• Fallback operation activates basic lighting control even if the
main Control4 controller or the IP router is oine.
• Can be configured with two to seven buttons using four
dierent button sizes for a total of 37 possible configurations
(one button kit included). Available buttons include:
• Single-high
• Double-high
• Triple-high
• Up/Down (single-high)
• Available in a wide array of gloss and satin colors (see
Available Colors in the specifications table).
• Custom engraving available to clearly identify each button.
• Backlit engraving provides easy readability regardless of light
level or time of day.
• Status and backlight LED colors can be set to reflect a device
or scene status or simply to complement the room’s décor.
• Ambient light sensor automatically adjusts backlight and
status LED brightness, depending on the light level in the
room.
Included
• Decora Wired Keypad
• Keycap button kit
• Pluggable terminal block
• Decora Wired Keypad Installation Guide
Installation notes
• Follow all instructions in the installation guide.
• Installs in a standard NEMA wall box using typical wiring
standards.
• The number of keypads that can be used per Bus Power
Supply and per Bus Ethernet Gateway depends upon the
wiring topology chosen. Prior to rough-in wiring, refer to
the Keypad Bus Wiring Guide to ensure proper wiring in an
allowed topology.
• Consider mixing wired and wireless keypads in an installation.
Wired keypads provide the security of a wire and fallback
capability, while wireless keypads help ensure a robust
ZigBee® mesh.
• Must be powered by a Control4 48V Bus Power Supply.
• Remove power from bus before connecting or disconnecting a
keypad from the bus.
For full installation instructions and warnings, see the
Configurable Decora Wired Keypad Installation Guide and the
Keypad Button Installation Guide. For bus wiring details, refer to
the Keypad Bus Wiring Guide.
Remember faceplates! (Not included)
Gloss: White (WH), Light Almond(LA),
Ivory(IV), Brown(BN), Black(BL)
Satin: Snow White (SW), Midnight
Black(MB), Biscuit(BI), Aluminum(AU)
Metal: Satin Nickel (SN), Stainless
Steel(SS), Venetian Bronze(VB)
1-Gang (C4-FP1-xx), 2-Gang (C4-FP2-xx),
3-Gang (C4-FP3-xx), 4-Gang (C4-FP4-
xx), 1-Gang Square (C4-SFP1-xx)