Lighting Design Guide
Table Of Contents
- Legal notices
- Introduction
- A complete control solution
- Comprehensive control options
- Enhanced user interface customization
- Integration simplicity
- Best-in-class dealer tools and support
- Wireless Lighting components
- Panelized Lighting components
- System design types
- Specifying a system
- Control4 Wireless Adaptive Phase Dimmer
- Control4 Wireless Keypad Dimmer
- Control4 Forward Phase Dimmer
- Control4 Wireless Switch
- Control4 Wireless Configurable Keypad
- Control4 Wireless Fan Speed Controller
- Control4 Wireless 0-10V Dimmer
- Control4 Auxiliary Keypad
- Control4 Wireless Outlet Dimmer and Switch
- Third-party products
- Control4 5-Slot and 2-Slot Panels
- Control4 8-Channel 0-10V Dimmer
- Control4 8-Channel Dimmer
- Control4 8-Channel Relay
- Control4 8-Port Ethernet Switch
- Control4 Bus Ethernet Gateway
- Control4 Bus Power Supply (48V)
- Control4 Decora Wired Keypad
- Control4 Square Wired Keypad
- Control4 Terminal Blocks
- Control4 4-Channel Bus Dry Contact Input Module
- Lighting project checklist
- Wireless Lighting application
- Panelized Lighting application
75
Control4 Terminal Blocks
Control4 Terminal Blocks
8-Channel Dimmer Terminal Block (C4-DIN-TB-8DIM)
8-Channel Relay Terminal Block (C4-DIN-TB-8REL)
Power/Override Terminal Block (C4-DIN-TB-PO)
Control4® Terminal Blocks mount in a Control4 Panelized
Lighting Panel (C4- DIN-5PAN or C4-DIN-2PAN) and are used to
terminate field wiring (Line, Neutral, and Load) for each circuit
in a Panelized Lighting system. Terminal Blocks provide the
appropriate connections for each module type.
Product features
• Available in three dierent models to accommodate the
8-Channel Dimmer, 8-Channel Relay, 8-Channel 0-10V Dimmer,
Bus Power Supply or 8-Port Ethernet Switch modules with the
appropriate connections.
• Includes terminal block and screws for quick installation into a
5-slot or 2-slot panel.
• Accommodates 22-12AWG wiring.
Specifications
Control4® 8-Channel Dimmer Terminal
Block
Control4® 8-Channel Relay Terminal Block Control4® Power/Override Terminal Block
Model Number C4-DIN-TB-8DIM C4-DIN-TB-8REL C4-DIN-TB-PO
Supported Devices 8-Channel Dimmer (C4-DIN-8DIM-E) 8-Channel Relay (C4-DIN-8REL-E)
8-Port Ethernet Switch (C4-DIN-8ESW-E),
Bus Power Supply (48V) (C4-DIN-BPS48 or
C4-BPS48), and 8-Channel 0-10V Dimmer
(C4-DIN-8TV-E)
Full Length/Half Length Full Full Half
Dimensions (H × W × D)
8.7" × 1.7" × 1.8"
(222 mm × 43 mm × 45 mm)
8.7" × 1.7" × 1.8"
(222 mm × 43 mm × 45 mm)
3.8" × 1.7" × 1.8"
(97 mm × 43 mm × 45 mm)
Weight 0.7 lb (0.32 kg) 0.8 lb (0.36 kg) 0.2 lb (0.09 kg)
Shipping Weight 0.8 lb (0.36 kg) 0.9 lb (0.41 kg) 0.3 lb (0.13 kg)
Included
• Terminal Block
• Two screws (10-32 × 0.375", Phillips pan head)
• Terminal Block Wiring Guide
• Terminal Block Installation Guide
Installation notes
• Sold separately from modules to allow for termination of field
wiring during the rough-in phase. All modules can then be
installed and wired to the terminal block during the trim-out
phase.
• Before you install any Terminal Block devices into a Control4
panel (C4-DIN-5PAN or C4-DIN-2PAN), install the panel. See
the 5-Slot and 2-Slot Panels Installation Guide for details
• Installed adjacent to 8-Channel Dimmer, 8-Channel Relay,
8-Channel 0-10V Dimmer, Bus Power Supply, or 8-Port
Ethernet Switch modules.
WARNING! Remove power to all circuits entering the panel
before installing the Terminal Blocks by locking all appropriate
circuit breakers in the OFF position.
For full installation instructions and warnings, see the Terminal
Block Wiring Guide and Terminal Block Installation Guide.