User's Manual

ManualsBrandsControl4 ManualsElectronicsRemote control

Supported models

• SR260 System Remote Control-English (C4-SR260)

• SR260-I System Remote Control-Iconic (C4-SR260-I)

Introduction

The Control4® SR260 System Remote Control goes beyond a typical

“universal” remote that simply learns IR codes from TVs, VCRs, CD

players, and DVD players. This remote control oers complete system

control in an elegant and compact design. The remote is equipped with

a full-color screen, battery gauge, hidden ambient light sensor, faster

processor, iconic button layout (C4SR260-I model), improved List

Navigator, nine programmable shortcut buttons, and more. It’s included

with the purchase of select Control4 controllers, and can also be

purchased separately. The SR260 requires Control4 OS 2.7 or later.

Use this guide along with the SR260 User Guide.

Use the remote to:

• Navigate system menus and access network-stored media on a TV or

monitor with the on-screen Navigator

• Navigate system menus and access media information on the

remote’s display

• Control all system devices

Features

• Bi-directional communication with system components

• ZigBee® wireless mesh networking technology

• Full access to system components

• Full-color screen display

• Back-lit keys and display for ease of use in dark rooms

• Ambient light sensor for ecient control of backlighting

• 50 buttons total:

• Two quick-access buttons (WATCH and LISTEN) to display either

the most used AV devices or a list of all available AV devices

• Nine programmable buttons

• Eight transport control buttons

• Standard alphanumeric buttons

• Control4 button

• Paging functionality

• Standard control features for digital satellite systems (DSS), cable

boxes, tuners, digital video recorders (DVR), DVD changers/players,

CD changers/players, MP3 players, VCRs, or TVs

• Built-in motion detection can wake up the remote automatically

• Powered by four AA batteries (included)

SR260 buttons

N Q

I J

SR260 English

N Q

I J

SR260-I Iconic

ROOM OFF—Turns o devices in

room

Display—Screen that displays color

text options

WATCH —Displays video devices

Control4 button—Displays

Control4 Home page on TV

LISTEN—Displays audio devices

LIST—Displays system’s menu

(Navigator) on the display screen

Programmable buttons—Functions

vary

GUIDE—Displays TV program

listings

▲PAGE/PAGE▼—Scrolls pages up

or down

PREV—Returns to previous

channel or screen

VOL—Controls device volume

SELECT and directional buttons—

Scrolls up, down, left, or right; the

center SELECT button selects the

menu option

CH—Scrolls up or down through

TV channels

MUTE—Toggles device sound o

or on

INFO—Shows program information

MENU—Accesses device features

and settings

CNCL—Sends “Cancel” or “Exit”

command

DVR—Controls the DVR

Playback control buttons:

• Rewind/Fast forward—Rewinds

or fast forwards

• Skip back/Skip forward—Skips

back or forward

• Play—Plays

• Record—Starts recording

• Stop—Stops

• Pause—Pauses

Programmable buttons—Functions

vary

Alphanumeric buttons—Directly

enters channel numbers or text

descriptions

Install and maintain batteries

Install the batteries

Install the four AA batteries (included) into the back of the SR260

according to the diagram in the battery compartment (with the + and -

terminals aligned correctly).

Battery use and care

• Keep the battery contacts and compartment clean.

• Remove the batteries from the remote if it is not going to be used

for several months.

• Extreme temperatures reduce battery performance. Avoid putting

the SR260 in very warm places.

Battery replacement safety rules

Warning! To prevent a battery short, leakage or rupture:

• Use typical AA Alkaline batteries only.

• Do not mix battery types, such as Alkaline and rechargeable

NiMH batteries.

• Do not attempt to recharge a battery unless the battery is

speciﬁcally marked “rechargeable.”

• Never dispose of batteries in a ﬁre.

AVERTISSEMENT! Pour empêcher court-circuiter, fuite ou

rupture de batterie:

• Utilisez les accumulateurs alcalins typiques d’AA seulement.

• Ne mélangez pas les types de batterie, tels que les batteries

alkalines et rechargeables de NiMH.

• N’essayez pas de recharger une batterie à moins que la

batterie soit spéciﬁquement marqué « rechargeable ».

• Ne vous débarassez jamais des batteries dans un feu.

Recharging station

A Remote Recharging Station is also available (sold separately) with a

rechargeable battery to keep your remote always charged. For more

information, see the Dealer Portal.

Conﬁgure the remote

Add and conﬁgure the remote control with Composer Pro. See the

Composer Pro User Guide for instructions about adding devices.

To conﬁgure the remote:

1 In Composer Pro, add and identify the System Remote Control

SR260 driver to your project.

2 In the System Design view, select System Remote Control SR260

to view and change the remote’s properties.

• Display Brightness—Sets the brightness of the remote’s screen,

from 0 (o) to 100 (full brightness).

• Keypad Brightness—Sets the brightness of the keypad backlight,

from 0 (o) to 100 (full brightness).

• Sleep Mode—Sets how long the remote stays awake after no

activity. The default setting is 15 seconds, but can be extended up

to 90 seconds or reduced to 10 to conserve battery life.

• Battery Level—Displays the current battery charge level.

• Channel—Displays the ZigBee channel set for the remote, which

should match the ZigBee channel for the controller.

• Gateway—Displays the MAC address of the ZigBee Server (usually

your controller, unless you specify dierently).

• MAC—Displays the remote’s MAC address.

• Firmware Version—Displays the remote’s current ﬁrmware

version.

• Watch/Listen Button Behavior—Sets whether the buttons show a

list of available devices or only the most recently used devices.

3 On the remote, press LIST, then select Settings > Conﬁg. The

following menu opens, where you can change remote control

settings:

• Display Brightness—Sets the brightness of the remote’s

screen.

• Keypad Brightness—Sets the brightness of the remote’s

keypad backlight.

• Motion Detect—Sets the remote to wake from Sleep Mode

when it’s picked up.

• Light Sensor—When enabled, adjusts the brightness of the

screen and keypad backlight based on the light it senses in

the room.

• Text Color—Changes the List Navigator’s text color.

• Recharge Station—When enabled, conﬁgures the remote to

use the Recharging Station’s rechargeable lithium polymer

battery. When disabled, conﬁgures the remote for regular

alkaline batteries.

• Battery Level—Shows the current battery charge level.

• Factory Defaults—Resets the remote to its factory defaults.

Each change is saved as soon as it’s made.

SR260 System Remote Control

Installation and Setup Guide

Summary of content (10 pages)

PAGE 1
SR260 System Remote Control SR260 buttons Installation and Setup Guide SR260 English SR260-I Iconic A B D E F Supported models H • • K SR260 System Remote Control-English (C4-SR260) SR260-I System Remote Control-Iconic (C4-SR260-I) G I E J H M K G J M L O N P Q N O R P Q R S T Use the remote to: • • Navigate system menus and access network-stored media on a TV or monitor with the on-screen Navigator Navigate system menus and access media information on the remote’s display
PAGE 2
Program the programmable buttons On the SR260, you can program up to nine buttons (red, green, yellow, blue, •, ••, •••, *, and #) to perform specific activities, for example, to execute any of the AV device’s macros or IR codes. To programm buttons based on room: 1 Select the Programming view, then select a room in the project tree in the Events pane. Program the buttons using either the AV device’s Properties or the room’s events.
PAGE 3
Regulatory Compliance & Safety Information for Contol4 Model C4-SR260, C4-SR260-I & C4-SRRC Electrical Safety Advisory Sécurité électrique consultatif Important Safety Information Informations de sécurité importantes Read the safety instructions before using this product. Lisez les consignes de sécurité avant d'utiliser ce produit. 1. Read these instructions. 1. Lisez ces instructions. 2. Keep these instructions. 2. Conservez ces instructions. 3. Heed all warnings. 3. Respectez tous les avertissements. 4.
PAGE 4
deux lames et une troisième broche de terre. La lame large ou la troisième broche est fournie pour votre sécurité. Si la fiche fournie ne s'adapte pas à votre prise, consultez un électricien pour le remplacement de la prise obsolète. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10.
PAGE 5
16. Pour couper entièrement l'alimentation appareil de l'alimentation secteur, éteignez le disjoncteur. Pour rétablir le courant, mettez le disjoncteur après les consignes de sécurité et des lignes directrices. 17. This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. 17. Ce produit repose sur l'installation des bâtiments pour les courts-circuits (surintensité) de protection.
PAGE 6
Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture AVERTISSEMENT! Pour réduire le risque de choc électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
PAGE 7
être déterminé en mettant l'équipement hors et sous tension, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes:     Réorienter ou déplacer l'antenne de réception. Augmenter la distance entre l'équipement et le récepteur. Connecter l'équipement à une prise sur un circuit différent de celui sur lequel le récepteur est branché. Consulter le revendeur ou un technicien radio / télévision qualifié pour obtenir de l'aide.
PAGE 8
RF Radiation Exposure Statement This equipment complies with the FCC/IC radiation exposure limits set fourth for portable transmitting devices operation in an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.    The equipment should only be used or installed at locations where there is greater than 20cm separation between the antenna and all persons.
PAGE 9
European Compliance Conformity of the equipment with the guidelines below is attested by the application of the CE mark. CE Declaration of Conformity Manufacturer’s Name: Manufacturer’s Address: CONTROL4 CORPORATION 11734 S.
PAGE 10
Recycling Control4 understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions.