Installation Guide

Continue to the next topic (CONNECTING THE VDB TO YOUR CONTROL4 SYSTEM).
CONNECTING THE VDB TO YOUR CONTROL4
SYSTEM
1.
In Composer Pro 3.2.0 or newer, connect to your controller.
2. Verify that the
Communication agent is added to the project. If it is not already added, go to
Agents > click Add > select the Communication agent > click OK.
3. In System Design > Discovered tab, double-click on the VDB to add it into the project and
identify it.
4. Select the VDB in the System Tree. On a new install, the driver says that the Admin Password is
not created.