User's Guide

ManualsBrandsControl4 ManualsElectronicsWT-100 Wireless Thermostat

Control4 WT-100 Wireless Thermostat User Guide 1

WT-100 Wireless Thermostat

User Guide

Congratulations on receiving your new WT-100 Wireless Thermostat!

Your WT-100 thermostat works with your EC-100 Energy Controller to

help manage your home’s energy use.

About your WT-100 Thermostat

Your WT-100 thermostat is designed to display the current temperature,

mode (Heat, Cool, Fan, or Off), and program (Wake, Leave, Return, or Sleep).

You may also use the WT-100 to view or change your current set temperature,

or to change the mode.

Your EC-100 Energy Controller has all the features of the WT-100 thermostat.

The EC-100 Energy Controller should be used to make changes to the thermostat

program or current set temperature, set a vacation hold, and view electricity usage

and billing data.

Summary of content (9 pages)

PAGE 1
WT-100 Wireless Thermostat User Guide Congratulations on receiving your new WT-100 Wireless Thermostat! Your WT-100 thermostat works with your EC-100 Energy Controller to help manage your home’s energy use. About your WT-100 Thermostat Your WT-100 thermostat is designed to display the current temperature, mode (Heat, Cool, Fan, or Off), and program (Wake, Leave, Return, or Sleep). You may also use the WT-100 to view or change your current set temperature, or to change the mode.
PAGE 2
Contents Overview ........................................................................................................................................................................................................................ 3 Terms ............................................................................................................................................................................................................................. 4 Viewing or Changing the Set Temperature .....
PAGE 3
Overview Connectivity-Shows that the WT-100 thermostat is communicating with the EC-100 Energy Controller. Battery—The battery icon will be displayed when the battery is low and needs replacing. A low-battery notification will also be displayed on the EC-100 Energy Controller. Mode—Heat, Cool, Fan or Off Program Indicator—Shows which pre-programmed time period is in effect. Current Temp/Set Temp— Your home’s current temperature is displayed here.
PAGE 4
Terms EC-100: Your EC-100 Energy Controller is table or counter top display that lets you view your home’s energy usage data and control your WT-100 thermostat. WT-100: Your WT-100 thermostat communicates with the heating and air-conditioning (HVAC) systems in your home. Set Temperature: Your set temperature is your desired temperature.
PAGE 5
Viewing or Changing the Set Temperature Your home’s current temperature is displayed on the WT-100 thermostat. Press either the Up or Down button twice (1st press turns on backlight) to temporarily display the set temperature in place of the current, actual temperature. Press the Up or Down button again to change the set temperature. Each press will change the temperature by one degree. Your new set temperature will be maintained for two hours.
PAGE 6
Changing the Mode The Mode icon indicates which system is current running: Heat, Cool, Fan or Off. Pressing the Mode/Off button will cycle through the modes. To change the mode, press the Mode/Off button until your desired Mode is shown. Heat - Thermostat is controlling the heater, Fan is on Auto and the fan icon is displayed only when the fan is running. Fan On Heat + Fan - Thermostat is controlling the heater, Fan is on and circulating air continuously.
PAGE 7
Programming your Thermostat Your thermostat is already programmed with Energy Star settings for schedule and temperatures. To customize your Wake, Leave, Return, and Sleep settings, use your EC-100 Energy Controller (see EC-100 User Guide). Energy Events During an Energy Savings Event, the utility company controls your thermostat to reduce overall electricity consumption. There are two types of Energy Savings Events: voluntary and mandatory.
PAGE 8
Regulatory Compliance FCC/Industry Canada FCC ID: R33H1/Canadian ID: 7848A-H1 This device complies with Part 15 of the FCC Rules Sub-Part A and B and with Canada ICES-003 and RSS-Gen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 9
Recycling For information on recycling, please go to www.control4.com/recycling Product Specifications BUTTONS: 3 Indoor: 100' Outdoor: 300' POWER: Power consumption: xxW Four AA batteries DISPLAY: Size: 3.