User's Guide

Wireless
LCD Keypad
Installation
Guide
Supported Models
KPZ-10B1-W White LCD Keypad
KPZ-10B1-B Black LCD Keypad
KPZ-10B1-A Almond LCD Keypad
Graphical Symbols in this Guide
The following symbols and their descriptions draw your attention to safe
practices and additional information that can help you avoid injury, death, or
loss of material or time.
WARNING!
This indicates a potentially hazardous situation that, if not avoided,
may result in death or serious injury.
DO NOT IGNORE A WARNING!
CAUTION!
This indicates a potentially hazardous situation that, if not avoided,
may result in minor or moderate injury.
DO NOT IGNORE A CAUTION!
IMPORTANT!
This indicates information that will help you avoid damage to
your equipment, loss of materials, or loss of time.
PAY ATTENTION TO
THESE IMPORTANT STATEMENTS!
NOTE:
This indicates a note on related information about the current topic.
TIP: This indicates a tip that might save you time or effort.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Protect the power cords, if applicable, from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. If applicable, unplug this apparatus during lightning storms or when unused for long
periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the appa-
ratus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING! To reduce the risk of fire or electrical shock, do not expose this
apparatus to rain or moisture.
WARNING! To avoid bodily harm, always contact a Control4-authorized reseller
for assistance if any repair or adjustment is required.
WARNING! Improper use or installation can cause LOSS/DAMAGE OF
PROPERTY.
CAUTION! Do not place unit near sources of heat or expose to direct sunlight
on the screen. Store in a cool and dry place.
General Description
An essential component in every home control system is a navigation device
that allows users to communicate with the Control4 system. Along with the
Wireless LCD Keypad, Control4 offers a variety of navigation options for every
room, including the System Remote Control, the On-screen (television), the
Mini Touch Screen, and the 10.5” Wireless Touch Screen, etc.
NOTE:
For a complete list of Control4 devices, see “Products” at http://
www.Control4.com
The LCD Keypad offers complete system control in an elegant, compact
design. It is equipped with a backlit, interactive LCD screen that provides status
information and feedback.
The LCD Keypad uses ZigBee IEEE 802.15.4 wireless technology for
communication to a Control4 Controller, such as the a Home Theater Controller
or a Media Controller.
It has eight navigation buttons, an intuitive Select Dial, and a unique
programmable shortcut button.
It gets its power from an AC power source close to the LCD Keypad installation
location. This power source requires both hot and neutral connections. See
Figure 1.
FIGURE 1.
LCD Keypad - Requires AC power to LCD Keypad
Placement: Place at a convenient location comfortable for users to view
displays and choose menu options, typically at eye level , (approximately 57 to
61 inches from the floor) and near the entrance of a room.
Wall Box Kit Options
There are four wall-box options to install the LCD Keypad. Metal and plastic
wall boxes are available in new or retrofit versions. The following diagrams
show the available wall-mounting kits.
FIGURE 2.
Mini Touch Screen/LCD Keypad Wall Box Kits - New Construction
FIGURE 3.
Mini Touch Screen/LCD Keypad Wall Box Kit - Retrofit (includes
wall-box template)
What’s in the Box
Carefully unpack the contents from the box and make sure the following items
were included. If any item is missing or damaged, please contact your
Control4-authorized reseller immediately.
• Control4 LCD Keypad
• Two sheet-metal screws (1/2-inch) for attachment to a plastic wall box.
(Metal wall boxes require machine screws. These screws are included
with the Metal Wall Box Kit.)
• Three wire caps
• Warranty card
• LCD Keypad Installation Guide (this document)
• LCD Keypad User Guide
Requirements
• Home Theater Controller or Media Controller fully installed and config-
ured with a Control4 project.
• Control4 Mini Touch Screen/LCD Keypad custom wall-box kit. See
“Wall Box Kit Options.”
• Access to in-wall AC power source. (A neutral connection is required.)
• 14 AWG electrical wire that is long enough to pull between LCD Key-
pad and power source.
Front and Rear Panel Descriptions
Front View
1. User Control Buttons (soft keys): For navigation and control of the
Control4 system.
2. Select Dial: For identifying the device during initial setup. Once setup is
complete, for scrolling through displays.
3. Shortcut Button: For custom programming to initiate an action or
sequence of actions.
4. Front Dimension: 6 1/2” (W) x 4 3/8” (H) x 1/5-2/5” (D)
5. Software: LCD Navigator (pre-installed)
6. Display: 3” viewing area FSTN LCD, 240x120 pixels, Grey on white with
white LED backlight
Back View
1. Power Supply: 100-240 VAC 60150 Hz (less than 6W)
2. AC Wires: For connecting the black (hot) and white (neutral) wires on the
back to the hot and neutral wires from the wall.
3. Power Consumption: 240x120
4. In-Wall Dimension: 5 7/8” (W) x 3 5/8” (H) x 1 1/2” (D)
5. Network Support: ZigBee IEEE 802.15.4
LCD Keypad
AC Outlet
Plastic model # AC-NWB3.8-G Metal model # AC-NWB3.8-M
Plastic model # AC-RWB3.8-G Metal model # AC-RWB3.8-M