User guide

System User Guide

Saved: 10/28/2013 12:48:00 PM

200-00001 Control4 System

User Guide

Page 43 of 160

Typically, this is how the subsequent screens are presented (depending on what you’re doing).

 Top Row

 Left side

o 4 button

o Back button

o Intercom button (if supported)

o Favorites button (star, if set up)

 Middle. Current room (select to change room)

 Right side

o Date, Time and Outdoor Temperature (if applicable)

o Battery level (if applicable)

o WiFi strength (if applicable)

 Second Row

 Left side

o Breadcrumbs of where you currently are

o Device type

 Floor/Room

 Top right side

o Sort buttons (AZ, 09). Select to sort the items on the page by type, last change,

and so on

o Grid view button

o List view button

 Body - Lists contents of the device type with transport controls or lists the contents either in a

list or a grid view.

 Bottom Row

 Media dashboard (if audio or video devices are selected)

 Media zones button (if applicable)

 Icons - The status of icons in these screens can change, depending on what you are doing in

the Navigator.

Rooms 6.2.3

You can view and change rooms in your Control4 system. When you change rooms, you can view

and manage the devices installed in those rooms. The current room always displays in the middle at

the top of the screen (shown below).

Note: Only the icons appear on the room's Home page for devices in a room or associated with a

room. For example, the Bathroom may not have any use for the Watch or Listen icons because there

may not be any audio or video devices installed in that room; consequently, the icons will not appear if

you select Bathroom. All Control4 Wireless Thermostats, however, appear on all Navigators.

Use the touch screens, MyHome apps, or on-screen Navigator's Home page to view the current room

that you want to control. To change rooms, see “Change Rooms” below. Note: The following page