User guide

22
DHCP Server: If the network does not have
a device serving as the DHCP Server (such
as a network gateway, switch, or router),
then you may use the Media Controller as
the DHCP server. The following screen with
default settings is displayed. These will
work for most Control4 system users.
Static IP: Choose this option if you do not
plan to use a DHCP solution. If you choose
this option, you must provide an IP address,
Mask (MSK), and Gateway (GWY) number.
3.
To set LCD display preferences:
3a. Press the LCD button on the front panel. The
LCD Setup screen is displayed.
3b. Rotate the dial to select Brightness or Contrast
and then press the dial.
3c. Rotate the dial to adjust the setting and then
press the OK button.
4. Press the OK button to exit LCD Setup.
DHCP SERVER SETUP
IP
MSK
GWY
BEG
END
10.
255.
.
10.
10.
4.
255.
.
4.
4.
4.
0.
.
4.
4.
1
0
10
100
OK CANC
STATIC IP SETUP
IP
MSK
GWY
10.
255.
.
4.
255.
.
4.
0.
.
1
0
OK CANC