Instruction manual

Please refer to the risk assessment table below and ensure all the necessary controls are in place.
Installation Risk Assessment
Hazard Control
Muscular strain from incorrect lifting
of opener
• Practice correct lifting techniques (carton weighs 9 kg)
Muscular strain from incorrect lifting
of door
• Practice correct lifting techniques when required to lift the door as per
installation instructions
Entanglement in operating Opener • Never plug in and operate prior to installation
Uncontrolled spring tension release
• Follow the installation instructions
• Ensure the U-bolt on the opposite end to the motor is tight
• Do not conduct any door repairs or maintenance (contact professional for
all door servicing)
Fall from ladder • Ensure ladder is the correct type for job
• Ensure ladder is on fl at ground
• Ensure user has 3 points of contact while on ladder
Crush injury from unsecured door • Place a 2 metre exclusion zone around area under the door while it is
unsecured
• Do not move under door while on door support (or ladder)
• Follow the installation instructions
• Fit door support (or ladder) snugly under door before removing U-bolt
and bracket
• Ensure door support (or ladder) is on fl at ground
Testing and Operation Risk Assessment
Hazard Control
Entrapment under operating door
• Keep children clear of operating door
• Ensure the garage door is in good working order
• Correctly set the Safety Obstruction Force
• Install Photo Electric Beams (recommended)
• Do not operate door when persons are near the door
Entanglement in moving door
• Fit locking bar covers
• Keep hands and loose clothing clear of door and guides at all times
Entanglement in operating Opener • Never plug in and operate prior to installation
Electrocution • Place opener in protected area so that it does not get wet
• Do not spray with water
• Do not open the protective covers
• Do not operate opener if cable is damaged
Risk Assessment
Controll-A-Door
®
P Diamond SDO-2v2 Instruction Manual4