User's Manual
Table Of Contents
- Important Safety Information
 - Introduction
 - EtherProx Entry Installation
 - Configuring the EtherProx Entry
 - Administering the EtherProx Entry
 - Diagnostics
 - Glossary
 
EtherProx Entry  Administering EtherProx Entry 
Configure Timed Events 
The Timed Events page lets you select events that you want to occur during 
specified time intervals, as shown in Figure 9. 
Figure 9: Timed Events Page 
The following table lists the Configure Timed Events settings with their 
descriptions. 
CONFIGURE TIMED EVENTS 
SETTING 
DESCRIPTION 
Door Override  Unlocks the door and allows unrestricted 
access. The parameters are the same as 
the groups in time clearances (See section 
4.3, "Time Clearances"). 
Card Only, No PIN  If you use PINs with your cards, you can 
specify a time clearance group during which 
cardholders do not need to enter the PIN. 
For example, at a busy time of day. 
Global PIN Only  Permits access with a global PIN that you 
specify in the Global PIN code box. When 
you enable this setting, cards are not 
required because anyone who knows the 
global PIN code can gain access. 
Global PIN Code  Lets you specify or change the global PIN. 
The global PIN must contain four digits. 
Software House    Page 37 










